User's Manual
10 2014 VOXX Electronics Corporation. All rights reserved.
Lot Mode Feature Programming - With an ACM Keypad
1. Open a door.
2. Turn the ignition ON.
3. Press and release the override button 3 times, the system will chirp 1 time.
4. Turn the ignition OFF, the system will chirp 2 times.
5. Turn the ignition ON, the system will chirp one time indicating option #1 in the
feature bank. The LED will ash the current setting for the option.
6. Use the CAR FIND/PANIC button to scroll through the selections in the feature
bank, the system will chirp to match the feature number.
7. Press the LOCK button to change the desired feature. The LED will ash
indicating the feature’s setting.
8. Turn the ignition OFF to exit programming, the system will chirp 1 time to
conrm exit.
Defaulting All Options in the Feature Programming Bank
1. Open a door.
2. Turn the ignition ON.
3. Press and release the override button 3 times, the system will chirp 1 time.
4. Press the programming button on the module, the system will chirp 4 times
indicating the features have been defaulted.
5. Continue on to edit option settings or turn off the ignition to exit programming.
NOTE: This will also default the Dome Light Delay timing if a custom time was set.