User's Manual

STEERING WHEEL / STALK / PANEL

USING THE REMOTE START FUNCTION

Pre-Heating or Pre-Cooling the Interior

Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the vehicle,

the heater or air-conditioner will activate and heat or cool the interior to your setting.

Using the Rear Defroster Feature

This feature is activated by pressing the

button on the remote control transmitter during remote start operation. The vehicle

will conﬁ rm activation by ﬂ ashing the hazard or parking lights one time and illuminating the Rear Defroster indicator on the

dashboard.

This feature is deactivated by pressing the

button on the remote control transmitter a second time. The vehicle will conﬁ rm

deactivation by ﬂ ashing the hazard or parking lights one time and cancelling the Rear Defroster indicator on the dashboard.

Note: The Rear Defroster feature can only be activated during remote start operation and it will remain on for the remaining remote

start run time (up to 10 minutes) or until it is deactivated by the remote control transmitter.

Note: If the vehicle’s windshield wipers are left on when the vehicle was last driven, the wipers will turn on if the remote

start function is activated. To avoid damage to the wiper blades (i.e. due to heavy ice or snow accumulated on the

windshield), it is a good idea to get in the habit of turning the vehicle’s windshield wipers off when parking the vehicle.