User's Manual

STEERING WHEEL / STALK / PANEL

USING THE REMOTE START FUNCTION

Entering the Vehicle While it is Running via Remote Start

Important Note: The outside door handle lock/unlock buttons will NOT function during Remote Start operation.

1. Press the

button 1 time on the factory Smart key transmitter to unlock the driver’s door.

2. Press the

button a second time within 4 seconds to unlock the remaining doors and tailgate.

3. Enter the vehicle with the factory Smart key transmitter. Wait 2-3 seconds for the ﬂ ashing

“KEY OUT” light on the instrument cluster to turn off.

4. Press the brake pedal and shift the gear selector into the desired gear as you normally would.

5. The remote start system disengages and the vehicle will operate normally, without the engine stopping.

Important Note: If the Gear Select Lever is moved from the “Park” position before the ﬂ ashing “KEY OUT” light turns off, the

engine will shut down. To restart the engine; press and hold the brake pedal, move the gear select lever to the “Park” position and

press the Start button on the dashboard.