User's Manual

STEERING WHEEL / STALK / PANEL

USING THE REMOTE START FUNCTION

Starting Your Vehicle

The remote start function is activated by pressing the

button 2 times within 3 seconds on your remote control transmitter. The

system will check the vehicle to ensure that it is safe to start and if all safety parameters are correct, the engine will start within 15

seconds and run for up to 15 minutes. Press and hold the

button again for 3 seconds to turn off the vehicle.

Remote Start Safety Features

For safety and security reasons, the system will fail to start and chirp the horn accordingly or shut down the engine during remote

start operation if any of the following occur:

Chirps Safety Feature

Hood opened

Brake Pedal pressed (Not applicable during remote start operation)

3Valet/Service Mode engaged

5 Hatch opened

6 Any door opened (Not applicable during remote start operation)

7 Gear selector moved from “Park” position or Start button pressed

As a safety precaution, the vehicle will shut off if left unattended after 15 minutes.

Important Note: Whenever the remote start function is activated, the system can take up to 15 seconds to start the engine.

Important Note: If the system determines it is NOT safe to start the engine, it will abort the operation.