User's Manual

Valet Mode

Valet mode prevents the remote start feature from being activated. It should be

used, for example, when you have your vehicle serviced. To engage Valet Mode:

• Withthesystem“unlocked”,pressandholdtheValetSwitchfor3seconds;the

Status Light will turn on and stay on to indicate Valet Mode. Attempts to remote start

will result in no response. Keep this in mind if remote start stops functioning.

• ToturnoffValetMode,simplypress&releasetheValetSwitchonce.TheStatus

Light will turn off.

Using The Valet Switch

Step 1 Have all transmitters which are to operate the system at hand. Then,

turn the ignition “on”.

Step 3 Press the button on each remaining transmitter one at a time. The sys-

temwillturnthelightsoffthenbackontoconrmthateachwaslearned.Ifacode

is not received within a 10 second period, the learning process will automatically

terminate, as indicated by the lights turning off.

Step 4 Turn the vehicle’s ignition key “off”.

Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5

times.Thestatuslightsandparkinglightswillilluminate,conrmingthatforthenext

10 seconds the system is ready to learn a transmitter/controller code. To enter a

code,simplypressandreleasethebutton.Whentherstcodeislearnedallexist-

ing stored codes will be erased.

Standard Programming: Before starting, be sure the system is in an “unlocked”

state by using a working transmitter or performing a manual override.

Code Jumping

Technology

Code jumping technology uses a complex algorithm to change the transmitter’s

codes every time a button is pressed to prevent a thief from copying the signal. Only

the system in your car has the key to decipher this code and it is not replicable.

Automatic Transmitter Verication

There the potential threat of someone, who has temporary access to your ve-

hicle, programming their own transmitter to your system. For example, a mechanic,

car wash attendant, or valet could do so and gather your personal info from any

paper work in your vehicle. Then, they could visit your home and help themselves

to the contents of your vehicle without any signs of intrusion. Many crimes go un-

noticed and people assume they have misplaced their belongings. ATV

shows you

how many transmitters are programmed to your system every time you turn on the

ignition key for a 10 second period. Then, you can easily identify if transmitters have

been added to your system.

Transmitter Protection & Technology

Manual Override

This puts the system in an “unlocked” state allowing for programming operations.

• Turnthevehicle’signition“on”.

• Pressandreleasethevaletswitchonce.

Programming Transmitters