User's Manual

5
AC Loss
Low or Missing Battery
Telco Line Loss
Panel/MODEL 2550 Cable Supervision Trouble
Activation of Input(s)
Unit Disabled by Dealer Command
Watchdog Circuit Activation
Catastrophic Failure Condition
F. Power Source Monitoring (AC & Low Battery Reporting)
. Reports
low battery conditions to the central station when voltage drops below 10.2 VDC.
Reports Low Battery Restoral at 11.4 VDC. It can also be programmed to report
Loss of AC power to the central station. This occurs at 102 VAC and restores at
107 VAC.
G. Automated Testing
. Sends an automated test signal to the central station
on a monthly, weekly or daily interval as programmed.
H. GSM Network Supervision
. Supervises the local GSM network. If the
unit no longer locates the local GSM network, one of its output relays activates to
report this trouble condition.
I. Status/Received Signal Strength LEDs
. The five LEDs indicate the
current operational status and are visible from outside the enclosure. These
LEDs can be placed into Received Signal Strength Indication mode (RSSI) to
assist in selecting the optimal mounting location for transmitting and receiving
cellular radio signals.
J. Easy Service Initiation
. Ships with an active SIM card, with easy
activations available via the Web at www.numerexsolutions.com or by calling
Uplink Customer Service at 1-888-9-UPLINK (1-888-987-5465). Requires the
central station receiver phone number and/or its IP address and Port number.
K. Web-based Services
. Available at www.numerexsolutions.com and
include:
a. immediate, real-time activation
b. history of past event transmissions
c. initiation of a test report
d. the ability to query the unit and receive a real-time radio report status
including a Received Signal Strength reading
e. programming inputs and other internally generated events
L. UL Listed
. UL listing for certificated installations including Household Fire,
Household Burglary and Combination Household Fire/Burglary. It is also UL
Listed for Supplemental Use. (See the UL Compliance Section of this manual for
complete details.)