User Manual

Table Of Contents

ESCRIPTION

DigiCell AnyNET

Network Access Modules are comprised of various radio modules support-

ing multiple analog and digital radio technologies. Supported technologies include GSM,

CDMA, and AMPS. Supported services include Cellemetry

and SMS for either GSM or

CDMA. Support is also provided for expansion to broadband wireless. In addition, the Module

can also be optionally ordered and configured with an IP communications module providing

10/100 Ethernet connectivity.

All modules feature an RS-232 serial port that can be used to program the unit and execute

firmware flash upgrades in the field. The port also provides serial connectivity to auxiliary

devices, including SCADA systems and alarm panels.

This AnyNET Module is an always on multi-purpose FCC certified device capable of sending

and receiving digital data over the GSM Network. The operating frequencies are in the 850

MHz and 1900 MHz bands. The Module can be powered using a nominal 12 VDC supply and

the transmitter is capable of operating as a class 4 (2 W output) on 850 MHz and Class 1 (1

Watt output) on 1900 MHz transmitter. The unit typically comes with a dual band quarter-wave

antenna with frequency bands of 850 MHz and 1900 MHz. The Module’s four discrete inputs

are triggered by DC voltage signals. The pulse counter can be set to report on demand, or it can

be set to report and reset. The pulse counter automatically reports when the counter overflows

and the power input reports a low battery condition of less than 10.2 VDC.

CellemetryXG Network

Operations Center

Multi-mode/

Multi-path

Network Access Module

security monitoring

mobile tracking

environmental alarms

vending intelligence

asset management

M2M Fixed and Mobile

Applications

M2M Customers

Internet

M2M Solution

Partners

Cellular Network