User's Manual

3
D ESCRIPTION
DigiCell AnyNET
®
Network Access Modules are comprised of various radio modules support-
ing multiple digital radio technologies. Supported technologies include GSM and CMDA.
Supported services include SMS for either GSM or CDMA. Support is also provided for
expansion to broadband wireless. In addition, a variant of this Module can be configured with
an IP communications module providing 10/100 Ethernet connectivity.
All modules feature an RS-232 serial port that can be used to program the unit and execute
firmware flash upgrades in the field. The port also provides serial connectivity to auxiliary
devices, including SCADA systems and alarm panels.
This AnyNET Module is an always on multi-purpose FCC certified device capable of sending
and receiving digital data over the GSM Network. The operating frequencies are in the 850
MHz and 1900 bands. The Module can be powered using a nominal 12 VDC supply and the
transmitter is capable of operating as a Class 4 device (2 Watt output) on 850 MHz and a Class
1 device (1 Watt output) on 1900MHz. The unit typically comes with a dual band quarter-wave
antenna with frequency bands of 850 MHz and 1900 MHz. The Module’s four discrete inputs
are triggered by DC voltage signals. The pulse counter can be set to report on demand, or it can
be set to report and reset. The pulse counter automatically reports when the counter overflows
and the power input reports a low battery condition of less than 10.2 VDC.
Numerex Network
Operations Center
Multi-mode/
Multi-path
Network Access Module
security monitoring
mobile tracking
environmental alarms
vending intelligence
asset management
M2M Fixed and Mobile
Applications
M2M Customer
s
Internet
M2M Solution
Partners
Cellular Network