User Manual

Guide d’utilisation PIE1058 – indice A – Janvier 2023 - 27/72
Time Lapse
OFF | ON
With Time Lapse set to ON, the camera will capture photos or videos
automatically at a pre-set time interval regardless of whether motions are
detected or not.
WARNING: when the Time Lapse parameter is set to ON, the PIR sensor is
deactivated (there is no motion detection).
Select “ON” then press OK to set the Time Lapse; the camera will shoot photos
or video clips automatically upon the set interval.
Configurable Time Lapse: from 00:00:05 to 23:59:59
Example: if Time Lapse is set to 00:30:00, the camera will automatically capture
photos/videos every 30 minutes.
Timer 1
OFF | ON
Each day, the camera will work only during the user set time period(s) (1 or 2).
Select “ON” then press OK to set the start time and end time of the desired
working period.
Example: If Timer 1 is set to 15:00-18:00; each day, the camera will work only
between 15h00 (03:00 PM) and 18h00 (06:00 PM).
Timer 2
OFF | ON
Each day, the camera will work only during the user set time period(s) (1 or 2).
Select “ON” then press OK to set the beginning time and end time of the desired
working period.
Example: If Timer 2 is set to 20:00-22:00; each day, the camera will work only
between 20h00 (08:00 PM) and 22h00 (10:00 PM).
Remote control
OFF | Real time | Delay 0.5H | Delay 1H | Delay 2H | Delay 3H | Delay 4H |
Delay 6H | Delay 12H | Delay 24H
− OFF: remote control deactivated
− Real time (this option will consume huge battery power): the camera 4G
module is in stand-by all the time; so, the camera setups can be changed
and saved whenever you send the remote setup commands.
− Delay (option suggested for AA battery power): the camera will only be
able to change and save the setups remotely every day with a delay of ½
hour, 1 jour, 2 hours, 3 hours, 4 hours, 6 hours, 12 hours or 24 hours
depending on the selected setting. The longer the delay, the lower the
energy consumption.
Cam
PIR
Other
Cam
PIR
Other
Language
En
Password
OFF
Time Stamp
ON
Reset
Battery type
ALK
FW Update
Frequency
50Hz
QR Code
Cycle recording
ON
About
Exit
Set
Exit
Set
MENU
MENU
OK
OK