User Manual

Guide d’utilisation PIE1058 – indice A – Janvier 2023 - 26/72
− High: all 60 infrared LED will work
− Low: part of the infrared LED will be turned off.
Camera ID
ON | OFF
Select “ON” then press OK to set an ID number for the camera (12 digits/letters).
Such function can help you identify from where and from which camera the
photos are.
GPS
OFF | ON
With GPS ON, the GPS information will be shown on photo stamp (if the “Time
Stamp” parameter is also set to “ON”).
NOTE: if the GPS signal is weak around the product, the GPS information will not
be shown on the photo stamp until the signal gets stronger.
Sendings/Day
Unlimited | 01 – 99
Example: if you select 50, every day, the camera will only send the 50 first photos
taken to the cloud storage. The rest of the photos taken that day will not be sent
but will be stored in the memory card.
Cam
PIR
Other
Cam
PIR
Other
PIR sensitivity
High
Remote control
Delay 1H
PIR interval
ON
Time Lapse
OFF
Timer 1
OFF
Timer 2
OFF
Exit
Set
Exit
Set
PIR
Settings
Programmable options (default settings in bold characters)
PIR sensitivity
High | Medium | Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat
and outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment
temperature are hard to tell by the camera, the suggested setting is high.
It is recommended to use low PIR sensitivity in environments with lots of
interference like hot wind, smoke, near window, etc.
PIR interval
OFF | ON – Default PIR interval: 20 seconds
Select “ON” then press OK to set the time interval that you desire between
photos/videos upon motion. This option avoids camera taking to many photos
or videos.
Configurable PIR Interval: from 00:00:05 to 23:59:59
Example: if the PIR interval is 00:01:00, the camera will wait 1 minute between
photo/video recordings with motion.
MENU
OK
MENU
OK