User Manual

Guide d’utilisation PIE1058 – indice A – Janvier 2023 - 23/72
If you need the QR code again, you can find it as follows:
Put the camera in SETUP mode > Press MENU > Go to the Other tab > Scroll down to the QR code parameter
> Press OK and the QR code is displayed on the LCD screen.
Scan the QR code
which appeared on
the camera screen
with the app.
Give your camera
a name and click
the “Next” button.
To finalize the synchronisation,
switch the camera off then on
again by setting the selector
to the OFF position and then
back to the SETUP position.
Your camera can now send the
captured photos to the cloud
storage.
You can install your device
in the field.
Remember to put the selector in
the ON position before you leave.