Use and Care Manual

03
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
WARNING:
SAVE THIS MANUAL
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
SYMBOLS
In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
To avoid serious personal injury, do not
attempt to use this product until you
read the manual thoroughly and
understand it completely . Save this
manual and review frequently for
continuing safe operation and
instructing others who may use this tool.
WARNING:
!
SYMBOLS SIGNAL MEANING
!
!
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
property damage.
●
●
02
HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672 HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672
GENERAL SAFETY RULES
WORK AREA
Keep the work area clean and well lit.
Cluttered benches and dark areas increase the
risks of accidents.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool
creates a spark which may ignite flammable
liquids, gases or dust.
Keep bystanders, children, and others away
while operating the tool. Distractions could
result in improper use and cause injury.
Avoid unintentional misfires. Always use
caution to avoid accidentally firing. Do not point
at yourself or anyone else .
●
●
●
●
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.
CALIFORNIA PROPOSITION 65
WARNING:
!
When using tools, basic precautions
should always be followed, including the
following:
WARNING
This product can expose you to chemicals
including lead, which is known to the
State of California to cause cancer and
birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
PERSONAL SAFETY
Remove finger from the trigger when not
Punching fasteners. Never carry the tool with
finger on trigger, the tool is able to fire a
fastener.
Always wear eye protection. Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury.
Always wear hearing protection when
using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
Use safety equipment. A dust mask, non-
skid safety shoes and a hard hat must be used
for the applicable conditions. Wear a full face
shield if you are producing metal filings or wood
chips.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Avoid unintentional firing. Keep fingers away
from trigger when not driving fasteners,
especially when connecting the tool to the air
supply.
Keep proper footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
Do not use on a ladder or unstable supports.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
MODEL: SPNNRMODEL: SPNNR
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARABLE PARTS
WARRANTIES
ADJUSTING THE EXHAUST
SETTING THE AIR PRESSURE
FIRING THE TOOL
P3
P5
P6
P6
P6
P7
P7
P8
P9
P9
P10