Use and Care Manual

PRODUCT WARRANTIES
1-Year Professional Tool Warranty
The Numax Tool Limited Warranty extends exclusively to the original purchaser of the Numax Product,
beginning on the date of purchase. During the warranty period Prime Global Products, Inc. (PGP)
expressly warrants that the Numax Product is free from defect in materials and workmanship subject to
the exceptions and limitations contained herein. PGP shall at its own option repair, replace, or offer a full
refund for a Numax Product that has a defect in materials or workmanship.
A DATED SALES RECEIPT OR PROOF OF PURCHASE FORM THE ORIGINAL RETAIL PURCHASER IS
REQUIRED TO MAKE A WARRANTY CLAIM. Warranty registration is also required and can be accom-
plished through Online Product Registration at www.numaxtools.com and select PRODUCT REGISTRA-
TION. To make a warranty claim, the original purchaser must return the Numax Product, postage prepaid
and insured, with proof of purchase to PGP or any of its authorized service centers. For questions, please
call 1-888-669-5672. Other than the postage and insurance requirement, no charge will be made for
repairs covered by this warranty.
Warranty Exclusions
These Warranties do not apply where:
• Repairs or alterations have been made, or attempted, by others and/or the unauthorized use of
non-conforming parts or accessories.
• Repairs are required due to normal wear and tear.
• The Product has been abused, misused, improperly maintained or operated, including: the failure to
use clean, dry, regulated compressed air at the recommended pressure; accidents caused by use of the
Product after partial failure.
• The Product is used commercially in assembly lines or production lines. The Product is intended for use
by individuals and these warranties do not extend to such commercial uses.
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE
WARRANTY IS MADE WITH REGARD TO THIS NUMAX PRODUCT. ANY IMPLIED WARRANTIES WILL
BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED
ABOVE. PGP SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR
SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION DOES NOT APPLY TO YOU. IN NO
EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING
NEGLIGENCE) OR OTHERWISE, SHALL PGP’S LIABILITY EXCEED THE PRICE OF THE PRODUCT
WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE
OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD
SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATION OF PGP, OR ANY DISTRIBUTOR OR
DEALER, IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION OF THIS WARRANTY.
All matters related to the sale and/or use of the Numax Product that is the subject of these limited
warranties, along with the construction and enforcement of the terms of these limited warranties
themselves, shall be subject to the laws of the state of Georgia. Any dispute arising out of the sale and/or
use of the Freeman Product that is the subject of these limited warranties shall be brought in Cherokee
County, Georgia. Purchase and/or use of the Numax Product, makes you subject to the benefits and
limitations of these limited warranties. Accordingly, any writ, judgment or other enforcement, obtained
from a jurisdiction, county, parish, state or federal court or other country, other than from the forum
identified above, shall be void and unenforceable against PGP.
These warranties give you specific legal rights. You may also have other rights which vary from state to
state.
THESE WARRANTIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
WARNING:
Allow battery to cool down before
charging if the battery is hot after
continuous use.
WARNING:
Remove the battery from the tool
for any inspection, maintenance,
and cleaning.
MAINTENANCE
INSTALLING BITS
Always remove the battery before inserting or
removing bits. Select the proper style and size bit
for the job. This tool is equipped with a spindle
lock. The chuck can be tightened with one hand,
creating higher grip strengths on the bit.
DRILLING/DRIVING SCREWS
To use the drilling mode; Rotate the torque
selector collar until the drill symbol: appears
in line with the arrow.
NOTE: A ratcheting sound may be heard when the
chuck is opened or closed. This is part of the
locking feature and does not indicate a problem
with the tool’s operation.
1. To open the chuck jaws, turn the sleeve in
counterclockwise direction.
When using drill bits, allow the bit to hit the
bottom of the chuck. Center the bit in the chuck
jaws and lift about 1/16” off the bottom.
When using screwdriver bits, insert the bit far
enough for the chuck jaws to grip the hex of the
bit.
2. To close the chuck jaws, turn the sleeve in
the clockwise direction. The bit is secure when
the chuck makes a ratcheting sound and the
sleeve won’t rotate any further.
CHARGING THE BATTERY
1. To charge the battery, simply insert the
charger cable to the battery charging port.
2. The battery indicator light should turn from
green to red when the battery is charging.
3. When the indicator light has turned green
the battery should be fully charged.
To use the driving mode: Rotate the torque
selector collar until the desired clutch setting
appears in line with the arrow. The adjustable
clutch, when properly adjusted will slip at a
present torque to prevent driving the screw too
deep into different materials and to prevent
damage to the screw or tool.
The torque specifications shown here are
approximate values obtained with a fully
charged battery pack.
1 - 3 For driving small screws
4 - 7 For driving screws into soft material
8 - 11 For driving screws into soft/hard materials
12 - 15 For driving screws into hard wood
16 - 18 For driving large screws
MODEL: SE12D
HTTP://WWW.NUMAXTOOLS.COM
1-888-669-5672
05
MODEL: SE12D
HTTP://WWW.NUMAXTOOLS.COM
1-888-669-5672
06
2
8
10
12