Full Product Manual

03
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
WARNING:
SAVE THIS MANUAL
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance.Keep this manual and the
receipt in a safe and dry place for future
reference.
In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
To avoid serious personal injury, do not
attempt to use this product until you read
thoroughly and understand it
completely . Save this manual and review
frequently for continu safe operation
and instructing others who may use this
tool.
the manual
ed
WARNING:
!
SYMBOLS SIGNAL MEANING
!
!
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
property damage.
●
●
02
MODEL: S50LSDH MODEL: S50LSDH
GENERAL SAFETY RULES
WORK AREA
Keep the work area clean and well .
Keep bystanders, children, and others away
while operating the tool.
Cluttered benches and dark areas increase the
risks of accidents.
Distractions could
result in improper use and cause injury.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Avoid unintentional misfires.
The tool
creates a spark which may ignite flammable
liquids, gases or dust.
Always use
caution to avoid accidentally firing. Do not point
yourself or anyone it
contains fasteners or not.
lit
towardselse regardless
●
●
●
●
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.
CALIFORNIA PROPOSITION 65
WARNING:
!
When using tools,basic precautions
should always be followed, including the
following:
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
PERSONAL SAFETY
HTTP://WWWNUMAXTOOLSCOM 1-888-669-5672
..
HTTP://WWWNUMAXTOOLSCOM 1-888-669-5672
..
Do not nail on top of another nail.
Always wear eye protection.
Always wear hearing protection when
using the tool.
Use safety equipment.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Keep proper footing and balance at all
times.
Do not use on a ladder or unstable supports.
Make sure the hose is free of obstructions
or snags.
Do not overreach.
and hit
someone, or cause the tool to react and result in
a risk of injury to persons.
Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury.
Prolonged exposure to high
intensity noise may cause hearing loss.
A dust mask, non-skid
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
if you are producing metal filings or wood chips.
Keep hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Proper footing and balance enables
better control of the tool in unexpected
situations.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
Entangled or snarled hoses can
cause loss of balance or footing and may
become damaged, resulting in possible injury.
Keep proper footing and
balance at all times. Proper footing and balance
This is
able to cause the nail to be deflected
long
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
PREPARE THE TOOL
LOADING CLEAT NAILS
LOADING STAPLES
UNLOADING CLEAT NAILS AND STAPLES
CHANGING THE FOOT PLATE
SETTING THE AIR PRESSURE
OPERATING THE TOOL
CLEARING JAMS
P3
P6
P6
P7
P7
P8
P8
P9
P10
P10
P11
P12
P13
P14
P15
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WARRANTIES