Operation Manual

7
Accelerometers
To adjust the accelerometers' MIDI messages:
1. Select an accelerometer by clicking the black box above its corresponding shoulder button
on the graphical interface. Its values will appear in the Edit Mappings panel below.
Note: The selected accelerometer's axis (Up-Down or Left-Right) will display in the Edit
Mappings panel, for reference.
2. Set the accelerometer's CC (Control Change) number by clicking the CC field and
dragging up or down. Alternatively, you can manually enter a value by typing it in.
3. Set the accelerometer's MIDI channel by clicking the Channel field and select the channel
number.
4. Repeat Steps 1-4, if desired.