QUICKSTART GUIDE ENGLISH ( 3 – 6 ) GUÍA DE INICIO RÁPIDO ESPAÑOL ( 7 – 10 ) GUIDE D’UTILISATION RAPIDE FRANÇAIS ( 11 – 14 ) GUIDA RAPIDA ITALIANO ( 15 – 18 ) KURZANLEITUNG DEUTSCH ( 19 – 22 )
BOX CONTENTS MP103USB Power cable Stereo RCA cable Quickstart Guide Safety & Warranty Information Booklet REGISTRATION Please go to http://www.numark.com to register your MP103USB. Registering your product ensures that we can keep you up-to-date with any new product developments and provide you with world-class technical support, should you run into any problems. QUICK SETUP 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Make sure all items listed in the BOX CONTENTS section are included in the box.
FRONT PANEL FEATURES 5 6 2 3 13 1 25 4 19 18 17 10 9 1112 21 14 15 16 23 20 8 7 24 22 22 1. POWER SWITCH – Turn the machine on and off with this button. The unit should always be shut down with this button first before any external power is removed. Typically it is recommended that the CD player is powered on before amplifiers and powered off after amplifiers. 2. EJECT – Press this button to eject the CD. If a CD is currently playing, this button will have no effect.
17. 18. 19. 20. 21. 22. 23. 24. 25. PROGRAM – This button helps you create a program – a sequence of tracks to play continuously: • IMPORTANT: Before performing any program functions below, pause playback by pressing PLAY / PAUSE. • To create a program: 1. Press PROGRAM. "P–##" will flash on the LCD ("##" indicates what number that track occupies in the program – "P–01," "P–02," etc.) 2. Turn the TRACK KNOB to select a track then press the TRACK KNOB to enter it into the program.
REAR PANEL FEATURES 2 3 3 4 4 1 5 1. VOLTAGE SELECTOR --- Set this switch to the voltage for your location. 2. POWER PLUG CONNECTOR – Plug your supplied power cord in here. 3. BALANCED OUTPUTS (XLR) – Connect your CD player to your mixer from these balanced XLR outputs. 4. LINE OUTPUTS (RCA) – Connect your CD player to your mixer from these line-level outputs. 5.
CONTENIDO DE LA CAJA MP103USB Cable de alimentación Cable RCA estéreo Guía de inicio rápido Folleto de información sobre la seguridad y la garantía REGISTRO Visite http://www.numark.com y registre su MP103USB. El registro de su producto asegura que podamos mantenerle actualizado con los nuevos desarrollos de productos y brindarle apoyo técnico de categoría mundial en caso de que tenga algún problema. INSTALACIÓN RÁPIDA 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
CARACTERÍSTICAS DEL PANEL FRONTAL 13 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 5 6 2 3 25 4 19 18 17 10 9 1112 21 14 15 16 23 20 8 7 24 22 22 POWER SWITCH – enciende y apaga la máquina con este botón. La unidad se debe cerrar siempre con este botón primero antes de que se quite cualquier potencia externa.
14. ENTRADA AL LOOP – Establece un nuevo punto de cue o el punto inicial de un loop (punto "Loop In") durante la reproducción. 15. SALIDA DEL LOOP – Establece el punto final de un loop (punto "Loop Out") y comienza a reproducir dicho loop. Mientras se reproduce un loop, pulse LOOP OUT para liberarlo del loop y continuar la reproducción normal. 16. REPETICIÓN DE LOOP – Reproduce la pista inmediatamente desde el comienzo de un loop (y reactiva dicho loop). 17.
CARACTERÍSTICAS DEL PANEL TRASERO 2 3 3 4 4 1 5 1. SELECTOR DE VOLTAJE – Ajuste este interruptor al voltaje de su ubicación. 2. CONECTOR DEL CABLE DE ALIMENTACIÓN – enchufe su cable eléctrico previsto aquí. 3. SALIDAS BALANCEADA (XLR) – Conecte su reproductor de CD a su mezclador desde estas salidas de balanceada. 4. SALIDAS DE NIVEL DE LÍNEA (RCA) – Conecte su reproductor de CD a su mezclador desde estas salidas de nivel de línea. 5.
CONTENU DE LA BOÎTE MP103USB Câble d'alimentation Câble RCA stéréo Guide d'utilisation simplifié Le livret des consignes de sécurité et des informations concernant la garantie ENREGISTREMENT Veuillez visiter le site internet http://www.numark.com pour enregistrer votre nouveau MP103USB. L'enregistrement des produits vous permet d'être informé sur les nouveautés concernant les produits et de vous offrir un soutien technique de niveau international, si vous en aviez besoin. INSTALLATION RAPIDE 1.
CARACTÉRISTIQUES DU PANNEAU AVANT 3 5 6 2 13 1 25 4 19 18 17 10 9 1112 21 14 15 16 23 20 8 7 24 22 22 1. INTERRUPTEUR D'ALIMENTATION – C’est le button qui permet d’allumer ou d’éteindre la machine. L’unité doit être éteinte premièrement par ce bouton avant de débrancher la machine. En général il est recommandé d’allumer le lecteur CD avant et les amplificateurs après pour éviter un choc audio à l’intérieur de votre système. 2. EJECT – Enfoncez ce bouton pour éjecter le CD.
14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. LOOP IN – Cette touche permet de programmer un nouveau point de repère ou un point de départ d'une boucle (LOOP IN) durant la lecture. LOOP OUT – Cette touche permet de programmer le point de sortie de boucle (LOOP OUT) et de lancer la boucle. Lorsqu’une boucle joue, il permet d'arrêter la boucle et de retourner à la lecture normale. RELOOP – Cette touche permet de lancer la piste immédiatement à partir du début d’une boucle (et réactive la boucle).
CARACTÉRISTIQUES DU PANNEAU ARRIÈRE 2 3 3 4 4 1 5 1. SÉLECTEUR DE TENSION – Régler la tension adéquatement pour votre région. 2. CONNECTEUR POUR CÂBLE D'ALIMENTATION – Branchez votre corde d’alimentation ici. 3. SORTIES SYMÉTRIQUES (XLR) – Ces sorties symétriques permettent de brancher le lecteur de disques compacts à une console de mixage. 4. SORTIES À NIVEAU DE LIGNE (RCA) – Ces sorties à niveau de ligne permettent de brancher le lecteur de disques compacts à une console de mixage. 5.
CONTENUTI DELLA CONFEZIONE MP103USB Cavo di alimentazione Cavo stereo RCA Guida rapida Libretto di istruzioni di sicurezza e garanzia REGISTRAZIONE Recarsi alla pagina http://www.numark.com per registrare il MP103USB. La registrazione del prodotto garantisce che possiamo tenervi aggiornati con tutti gli ultimissimi sviluppi del prodotto e offrirvi assistenza tecnica di livello mondiale, in caso di eventuali problemi. IMPOSTAZIONE RAPIDA 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
CARATTERISTICHE PANNELLO ANTERIORE 3 13 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 5 6 2 25 4 19 18 17 10 9 1112 21 14 15 16 23 20 8 7 24 22 22 INTERRUTTORE DI ALIMENTAZIONE – Questo è il pulsante che permette di accendere e di spegnere l’apparecchio. L’unità deve essere spenta sempre con questo pulsante prima che qualsiasi cavo di alimentazione sia tolto.
14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. LOOP IN – Imposta un nuovo punto cue o il punto di inizio di un loop (un punto "Loop In") durante la riproduzione. LOOP OUT – Imposta il punto di fine di un loop (un punto "Loop Out") e avvia la riproduzione del loop. Mentre si riproduce un loop, premere LOOP OUT per staccarsi dal loop e continuare con la riproduzione normale. RELOOP – Riproduce la traccia immediatamente dall’inizio di un loop (e riattiva il loop stesso).
CARATTERISTICHE PANNELLO POSTERIORE 2 3 3 4 4 1 5 1. SELETTORE VOLTAGGIO – Impostare questo interruttore sul voltaggio locale. 2. PRESA CONNETTORE D'ALIMENTAZIONE – Inserire a questo livello il cavo di alimentazione in dotazione. 3. USCITE BILANCIATE (XLR) – Collegare il lettore CD al mixer da queste uscite bilanciate. 4. USCITE A LIVELLO DI LINEA (RCA) – Collegare il lettore CD al mixer da queste uscite a livello di linea. 5.
INHALT DER VERPACKUNG MP103USB Stromkabel Stereo-Cinch-Kabel Kurzanleitung Broschüre mit den Sicherheits- und Garantierichtlinien REGISTRIERUNG Registrieren Sie Ihren MP103USB bitte auf http://www.numark.de. Dadurch geben Sie uns die Möglichkeit, Ihnen Informationen bei Produktaktualisierungen zukommen zu lassen und um Ihnen den bestmöglichen technischen Support zu bieten. SCHNELLES EINRICHTEN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
ÜBERSICHT ÜBER DIE VORDERSEITE 3 13 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 5 6 2 25 4 19 18 17 10 9 1112 21 14 15 16 23 20 8 7 24 22 22 EIN-/AUS-SCHALTER – Schalten Sie das Gerät mit dieser Taste ein oder aus. Das Gerät muss immer mit dieser Taste abgeschaltet werden, bevor Anschlusskabel abgezogen werden.
14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. LOOP IN – Erzeugt einen neuen Cue-Punkt oder startet während der Wiedergabe einen Loop-Punkt (einen “Loop In”Punkt). LOOP OUT – Erstellt einen End-Punkt eines Loops (einen “Loop Out”-Punkt) und startet die Wiedergabe des Loops. Drücken Sie - während ein Loop wiedergegeben wird - LOOP OUT, um den Loop zu beenden und zur normalen Wiedergabe überzugehen. RELOOP – Spielt den Track sofort vom Beginn des Loops (und reaktiviert den Loop).
ÜBERSICHT ÜBER DIE RÜCKSEITE 2 3 3 4 4 1 5 1. SPANNUNGSUMSCHALTER – Stellen Sie diesen Schalter auf die für Ihren Aufenthaltsort richtige Stromspannung ein. 2. ANSCHLUSS FÜR GENORMTEN NETZSTECKER – stecken Sie das mitgelieferte Anschlusskabel hier ein. 3. SYMMETRICHEN AUSGÄNGE (XLR) – Verbinden Sie CD-Player und Mischpult über diese symmetrischen Ausgänge. 4. CINCH-ANSCHLÜSSE FÜR AUDIO (RCA) – Verbinden Sie CD-Player und Mischpult über diese Line-Level-Ausgänge. 5.
SPECIFICATIONS FREQ RESPONSE: 20 Hz – 20 kHz (± 2 dB) THD: < 0.03% SNR: > 80 dB (A-weighted) DYNAMIC RANGE: > 85 dB OUTPUT LEVEL: 1.9 V (±0.2 V) DISC TYPE: Redbook CD, CD-R, CD-RW, MP3 CD TIME DISPLAY: Track Elapsed, Track Remaining, Total Remaining PITCH CONTROL RANGE: ± 4, 8, 16 or 100% POWER SUPPLY: 115/230 V AC, 60/50 Hz DIMENSIONS (W x D x H): 19" x 10.6" x 3.5" / 483 mm x 269 mm x 89 mm WEIGHT: 10.1 lbs / 4.
www.numark.com MANUAL VERSION 1.