Operation Manual

4
Features
Top Panel
1. Browser Knob: Rotate this knob to cycle through folders and tracks. Press the Knob To
cycle between the Crates and Library.
2. Master Gain: Adjusts the master volume in the software.
3. Cue Mix: Adjusts the software’s audio output to the headphones, mixing between the
cue output and the master mix output.
4. Cue Gain: Adjusts the volume for headphone cueing in the software.
5. Load: Press one of these buttons while a track is selected to assign it to Deck 1 and 2,
respectively, in the software.
6. High EQ: Controls the treble frequencies for the individual channels.
7. Mid EQ: Controls the mid range frequencies for the individual channels.
8. Low EQ: Controls the bass frequencies for the individual channels.
9. Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a
Low Pass Filter or High Pass Filter.
10. Cue/PFL: Sends pre-fader audio to the Cue Channel for headphone monitoring.
11. Channel Volume: Adjusts the volume of the individual channels in the software.
12. Crossfader: Controls the blend between the two decks.
13. Pitch Bend Down: Press and hold to momentarily reduce the speed of the track.
14. Pitch Bend Up: Press and hold to momentarily increase the speed of the track.
15. Pitch Fader: This controls the speed of the music. Moving towards the "+" will speed the
music up, while moving towards the "–" will slow it down.
16. Touch Strip: Use the Touch Strip to adjust parameter 1 of the assigned FX. Hold Shift +
Strip Search to search through a track’s time.
17. Parameter 2: Use to adjust the additional parameter of the assigned FX.
1
2
3
4
5
5
6
7
8
9
6
7
8
9
10
10
10
10
11
11
11
11
12
12
13
13
14
14
15
15
13
13
14
14
15
15
16
16
16
16
17
17
17
17
18
18
19
19
20
20
21
21
18
18
19
19
20
20
21
21
23
23
23
23
24
24
24
24
25
25
25
25
26
26
26
26
27
27
27
27
28
28
28
28
29
29
29
29
22
22
22
22
30
30
1