Professional Disc Jockey Products PRO SM-3 PROFESSIONAL DJ MIXER with Infinity Fader™ Owner’s Manual ©2000 Industries http://www.numark.
PRO SM-3 i) Safety Information j) k) l) m) n) o) SAFETY INSTRUCTIONS a) b) c) d) e) f) g) h) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed.
PRO SM-3 VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • • • • • • • • • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years.
PRO SM-3 PRO SM-3 PROFESSIONAL DJ MIXER CONGRATULATIONS! You have purchased the PRO SM-3 Stereo Mixer by . The PRO SM-3 features the patented design Infinity™ fader, that utilizes a beam of light and variable blocker mechanism. The fader itself has no audio or electrical parts attached to wear out. This revolutionary concept achieves the absolute fastest and smoothest cuts with the cleanest sound. The Infinity™ crossfader is user assignable and allows for complete slope variance along with hamster control.
PRO SM-3 TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Description of the Features 6 Quick Setup Diagram 9 Infinity™ Fader 10 Specifications 11 Warranty 12 - The Leader in DJ Technology ©1999 Industries -5- http://www.numark.
PRO SM-3 5 10 19 8 12 20 11 16 6 23 15 7 24 14 21 4 2 3 1 9 22 13 25 17 18 - The Leader in DJ Technology ©1999 Industries -6- http://www.numark.
PRO SM-3 MIXER FEATURES INPUTS 16. Headphone Level – adjusts cue volume. 1. Input faders - control individual source levels in the mix. 2. Hamster Control – reverses direction of the input fader. 3. Slope Adjust – sets the rate of volume increase as the Input Fader is moved. 4. Input Toggle Switch (Transform) - selects which source will be live to that channel based on what you have connected to the rear panel input section.
PRO SM-3 REAR PANEL FEATURES 14 13 10 12 11 6 9 8 7 7 7 1 6 5 8 6 5 8 5 3 4 2 12. Channel Send – The output is determined by pushing the front panel process selectors next to each channel. Note: this mixer was design to use one processor for many channels, If more than one channel is selected than the signal will bleed across the channels. This can be a desired effect if you wish to blend wet a dry signal.
PRO SM-3 QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on.
PRO SM-3 Infinity™ Fader The First truly Optical Fader The Infinity Fader™ is a Industries worldwide patented design and completely changes the way audio mixers work. The Infinity™ Fader is the world's first truly 100% optical fader. Previous concepts have always required a stiff shaft to pull electrical contacts along a circuit board. Though these variable resistive faders have been used for many years there have always been some basic drawbacks with the design.
PRO SM-3 SPECIFICATIONS INPUTS: Line: 10k input impedance 175mV rms sensitivity (for 1.22V output) Mic: 10k input impedance unbalanced 3mV rms sensitivity (for 1.22V output) 85mV rms max input Phono: 47k input impedance 1.4mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: Headphone Amp: Distortion: 9V rms max 0.5 watt into 47 less than 0.01% SIGNAL TO NOISE RATIOS* (vs.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years.