Moving Cameras

Intrusion | Getting Started | G100 Z-Wave gateway | 5
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2015.02 | v1
Notice
The blue LED will flash during the startup process. The blue LED illuminates continuously and the
orange LED flashes once per second when it has completed the startup process. You're now ready to
walk with your G100 anywhere around your home to pair controllable devices.
2. Locate the device you want to pair.
3. Press the button to set the G100 to enter inclusion mode. Refer to the “pairing” or “inclusion”
section of your device’s documentation for more information related to completing the pairing and/or
inclusion process. The orange LED flashes rapidly for 3 seconds to indicate a new device was
paired successfully.
4. Press and hold the
button for 5 seconds until all LEDs go off to save your changes. Your G100
exits the inclusion mode and turns off the battery mode.
Notice
If you want to exclude a device, follow the above mentioned steps, but press the button instead of
the button. To exit, hold the button for 5 seconds until LEDs go off. This will save all changes.
User Interface Features (for web and mobile apps)
The G100 provides a variety of interactive features accessed through a web browser, or through the use
of a mobile device and supporting app. Refer to the list below:
• Card Carousel. This feature allows you to quickly view the current state of the system. The left card
shows the connection state of all devices, and the right card shows if any of the security devices
require your attention.
• House Modes (My Modes, Preset Modes). House modes are easy to use, pre-defined settings that
allow you change your home automation configuration without the need to create scenes. This allows
you to quickly toggle between the four presets (modes). These presets are optimized for their
immediate use. You may adjust presets by using the
button. This opens the configuration menu.
• Weather widget (Web UI). The weather widget shows the temperature and current conditions for the
city you choose. It also shows the local time of the device’s location.