Moving Cameras

Intrusion | Getting Started | G100 Z-Wave gateway | 4
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2015.02 | v1
4. Click on the appropriate device category (plus symbol).
5. Select the device type and model number that you want to install and click the
symbol next to it.
Follow the instructions on the screen.
Notice
Your Bosch Security Dealer has already installed your Bosch Security System. You will not find this
device within the Device installation wizard.
Pairing Installed Devices with a Battery Powered G100
Sometimes controllable devices in your home are not easily moved within pairing distance of your G100.
For example, a light switch that is already installed on a wall in another room, or a door lock. For these
situations, the G100 includes a battery pack that allows you to disconnect the G100 from the power cable
and bring it to the installed device. This step is optional, but if you do have pre-installed or otherwise
non-movable controllable devices that you want to pair with your G100, please perform the following:
1. Disconnect the G100’s network cable and power cable (the one that goes into the wall outlet) and
press and hold the battery
button for 5 seconds. Doing so causes the G100 to power up in
battery mode.