IQstream TV Instruction Manual
CONTENTS PAGE IN THE BOX 1 PRODUCT OVERVIEW 2 CONNECT TO TV (QUICK CONNECT GUIDE) 3 IN APP SETUP 4 OPTIMAL STREAMING RANGE 5 ALTERNATE AUDIO CONNECTIONS 6 SOUND BAR / SOUND SYSTEM LINKAGE 7 AUDIO TROUBLESHOOTING 8 CUSTOMER SUPPORT 9
1. IN THE BOX IQstream TV USB Power Cable Digital Optical Cable 3.
2.
3. CONNECT TO TV (QUICK CONNECT GUIDE) * OPTIMAL EXPERIENCE OUT IN Power IQstream TV: Connect USB power cable to a USB port on your TV. If your TV does not have a USB port, locate an alternate source of USB power (eg. Wall charger.) Audio: Connect digital optical cable from the digital audio OUT on your TV to the INput on your IQstream.
4. IN APP SETUP Connect your IQbuds to your phone. Stand close to your IQstream and open the IQbuds app. You will receive a detection pop up and be guided through the set up. Your IQbuds, IQstream and phone will all work together. The IQbuds app will control the IQstream functions. UPDATES Ensure you have the latest version of the IQbuds app. You may need to update your IQbuds firmware. We suggest you check for updates via: www.nuheara.
5. OPTIMAL STREAMING RANGE Walls, doors and other obstacles may affect range and quality. For the best experience, place the IQstream on a flat surface with the LED facing you.
HEAR TV BETTER
6. ALTERNATE AUDIO CONNECTIONS IF YOUR TV DOES NOT HAVE DIGITAL OPTICAL PORTS, PLEASE USE THE BELOW OPTIONS. POWER CONNECTION IS THE SAME AS PAGE 3. TV OUT IN Option 1: Connect RCA cable from your TV audio OUTput, into cable, then into the INput on your IQstream. 3.5mm AUX Option 2: Connect 3.5mm AUX cable directly from the headphone jack on your TV to the INput on your IQstream.
7. SOUND BAR / SOUND SYSTEM LINKAGE TV is your primary source of sound. Sound will flow: OUT of your TV and IN to the IQstream, then OUT of your IQstream and IN to your sound bar/external speaker. Connecting your TV, to the IQstream, to your sound bar will allow audio to flow through all 3 devices. OUT IN 1. Connect digital optical cable from the digital audio OUT on your TV, to the INput on your IQstream. (This step may already be completed.) 2.
8. AUDIO TROUBLESHOOTING Not hearing any sound? Check that the audio connections are placed in the right ports on the IQstream and your TV. Ensure they are inserted correctly. Refer to your preferred connection option in the manual and check each one carefully. When using the digital optical cable: Check your TV manual to locate your sound output settings. Change sound output setting to PCM or bitstream off. Commonly found in: Menu > Sound Settings. Can be referred to as SPDIF or optical output.
9. CUSTOMER SUPPORT Any Questions? We’re here to help! Contact our customer care team. care@nuheara.com www.nuheara.
Safety and Handling The Nuheara IQstream TV Model NU410 is intended to be used in an indoor setting only. For safe operation do not submerse the device in liquid. At end of life, dispose of IQstream TV at a battery/ electronic waste collection centre. The rated voltage of the IQstream TV device is 4.40V to 5.25V For support and troubleshooting information go to www.nuheara.
Some states and countries do not allow limitations on how long such warranties, conditions and/or implied terms may last, so the limitations described above may not apply to you. This warranty is offered in addition to rights and remedies conveyed by consumer protection laws and regulations that cannot be statutorily waived and does not affect your applicable statutory rights. To the extent permitted under applicable law, the duration od any implied warranty shall be one year.
Country Type Approval 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
