User Manual

NUHEARA Pg. 4 IQBUDS2 MAX
How To Use Ear ID?
When completing Ear ID, there are a few steps in the process. Before starting, please make sure you are
in a quiet room, there will be a noise level check at the start of the assessment.
You will come to a screen where some tones will test
your ear tips to see if they seal your ears well.
Sealing your ears makes sure you can hear each tone
correctly, to give the best results.
Hit the TAP button as soon
as you hear a tone.
Please note, not everyone can hear all the tones, if you find yourself stuck in a loop, please proceed to the
assessment. We recommend you try the heartbeat tones at least once.
Please note, If you do not see these tip changing screens, don’t worry. It just means you had a good seal and
you were able to progress past this.
Instructions to changing
tip sizes.
A special heartbeat tone is played.
to determine your seal.
Try both left and right ears.
If your tips don’t fit well you may be given some
advice on trying other sizes.
Take your time and try more tip sizes.