QUICK START GUIDE IN THE BOX: USB CHARGE CABLE CHARGE CASE EAR TIP TRAY CARRY BAG IQBUDS 2
CHARGING YOUR IQBUDS AND CASE Your case carries and charges your IQbuds. Your case provides you with the convenience of charging your IQbuds when you are out and about. You can charge your case via the USB cable connected to a USB power source (Wall charger, computer, etc.) The case has lights that indicate different states, please see below: FRONT LIGHTS (IQBUDS CHARGE) SIDE LIGHT (CASE CHARGE) *Please note that the lights will turn on when the case is opened or closed.
FITTING YOUR IQBUDS INSERTING IQBUDS Check the IQbuds for left and right markings to make sure you put the correct bud in the correct ear. Make sure the tip is at the bottom before inserting. FIT LIKE AN EARPLUG For high quality bass and noise reduction IQbuds need to form an airtight seal. Push the buds into your ears as you would an earplug. EXPERIMENT WITH TIPS Pick the largest size ear tip that fits in your ear comfortably and forms the best seal.
APP SETUP + PAIRING Download the IQbuds app to begin the set up process. Set up instructions in the app: Set up instructions in the app: Set up instructions in the app: Set up instructions in the app: IQbuds IQbuds IQbuds IQbuds IQbuds Nuheara All set up instructions will be in the app to guide you. TAP TOUCH These highlighted green surfaces are the tap sensors. You can control different features with tap gestures.
BLUETOOTH iOS (Apple) After the pairing screen you will be presented with different options based on what software version your phone is running. iPhones with iOS 13 and above will allow you to pair in the app. You will be shown a pop up message asking you to pair, like this: *IQbuds2MAX_XXX All IQbuds have a unique 3 letter/number code Tap “Pair” and you will be able to proceed through the app to complete the process.
Android After the pairing screen you will be presented with a pop up message asking you to connect, like this: *IQbuds2MAX_XXX All IQbuds have a unique three letter/number code Tap “Connect” and you will be able to proceed through the app to complete the process. If you have not activated pairing properly you may be taken back to the pairing screen, in which case try the pairing action again and wait until you hear “Pairing”.
TAP TOUCH CONTROLS Please note the below are default settings. You can customize them in Tap Touch in the app. This allows you to pick and choose different functions to assign to different tap gestures so you can personalize the way you control your IQbuds.
IN THE BOX USB CHARGE CABLE EAR TIP TRAY CARRY BAG oo~oo 0 O IQBUDS CHARGE CASE FULL USER MANUALS ONLINE: www.nuheara.
LIGHTS TURN ON WHEN CASE OPENS/CLOSES FRONT LIGHTS (IQBUDS CHARGE) SIDE LIGHT (CASE CHARGE) .. . 9 0 b .:-- !... -~ ____,/ ~------------------------ No lights when case opens or closes= Battery flat. Use USB cable to charge. Download the IQbuds app to begin the set up process: ► Q.
NUHEARA APP USER MANUAL Tips & Tricks to getting the best out of your IQbuds Products Follow this in-depth guide to learn more about your IQbuds products. We will walk you through each feature and what it can do for you and how you can use it in different situations.
Getting started with IQbuds2 MAX We have created this guide for you to get the most out of your IQbuds. We will explain each feature and provide some tips and tricks on how to understand and use them. Component Names Before we proceed, we would like to advise you on names of different components of the app, so you know what we are referring to throughout this document. Feature Card Location Drop Down Menu Dial Active Dot Menu Bar Item NUHEARA Pg.
EAR ID Menu Bar Item To begin your IQbuds experience, we recommend you start with Ear ID. It will take around 10 minutes to go through this process and get your IQbuds personalized for your hearing. What Is Ear ID? How Can Ear ID Help You? You can find Ear ID in the menu bar. From your results it will also provide a customized hearing profile for you, that boosts your hearing in areas you may have some hearing loss. Ear ID is a certified hearing assessment within the app.
How To Use Ear ID? When completing Ear ID, there are a few steps in the process. Before starting, please make sure you are in a quiet room, there will be a noise level check at the start of the assessment. You will come to a screen where some tones will test your ear tips to see if they seal your ears well. If your tips don’t fit well you may be given some advice on trying other sizes. Sealing your ears makes sure you can hear each tone correctly, to give the best results.
Once Ear ID has tested your tip sizes, you can then start the assessment. Don’t stress if you can’t hear them all, that’s what we are here for. This assessment will identify the quietest tone you can hear in each frequency. You may experience some gaps in tones, that is fine too. Take your time and complete the process. You can exit the process here. Progress bar shows you how long you have left. TAP button confirms the tones you hear. Tap as soon as you hear a tone. You can pause the test here.
How To Use Ear ID? (Once the assessment is completed) You can turn Ear ID on and off using this switch here. You can re-take the Ear ID assessment with “Recreate” Turning Ear ID on will calibrate your IQbuds to your personal hearing profile. Turning Ear ID off will remove the custom profile that was created for you. “Help me understand this” will provide some information on how to interpret your results.
Locations Learning about locations is key to creating the best experience depending on your environment. We recommend you always start by choosing your location. What Are Locations? Locations are presets for each feature that we have created as a recommendation. Features like Volume, SINC, EQ and Focus all sit under locations. You can tweak each of these and they will be automatically saved each time you change it.
How Do I Use Locations? The large blue bar at the top is the locations drop down menu, it will show you what location is currently selected. You can select up to 4 favourites. The favourites list is used when you cycle through your locations using Tap Touch. Simply open the drop down menu and select your location, tap the drop down menu again to close. For further information, Tap Touch is on page 17.
Volume VOLUME Feature Card The World menu bar item holds all features that can make a difference to hearing your surroundings. The first feature card is Volume, this just controls the volume of your surroundings you hear through the IQbuds. You may see volume referred to as World Volume or World on and off. This is because world is the global control for sound and the volume controls how much of it you can hear.
How To Use Volume? Using the dial + active dot controls the volume of your surroundings. ACTIVE DOT TO THE LEFT ON OFF ACTIVE DOT TO THE RIGHT ANC ON World ON - OFF ANC World ON - + + Increase the volume of your surroundings. Reduce the volume of your surroundings. Using switch in the middle of the dial turns the feature on and off.
SINC SINC Feature Card What Is SINC? How Can SINC Help You? The SINC dial controls speech vs ambient noise. It gives you the ability to reduce background noise to focus on speech. You can use SINC in noisy or crowded environments to reduce the ambient noise and focus on speech. It acts as a feature that suppresses background noise. When moving the active dot you will be shown a small message of what is happening as you move it. The message will be different depending on which way you move the dot.
How To Use SINC? Using the dial + active dot controls the level of background noise vs speech. ACTIVE DOT TO THE LEFT ACTIVE DOT TO THE RIGHT SINC ON Ambience SINC ON Speech Ambience Allow more ambience. Speech Reduce the background noise and focus on speech. Using the switch in the middle of the dial turns the feature on and off. SINC ON SINC OFF SINC ON Ambience SINC OFF Speech Ambience Speech Allow ALL ambience in as if you weren’t wearing the IQbuds.
World EQ WORLD EQ Feature Card What Is World EQ? How Can World EQ Help You? World EQ is a fine tuning control. It allows you to filter out either high or low frequencies in your environment. If you are in an environment with an air conditioner that creates a low frequency humm, it can become annoying or mask what you really want to hear. You can use the dial to reduce those noises. This shows when the action bar is being moved around the dial it will tell you what it is set to.
How To Use EQ? There is a Min, Mid and Max strength settings for both filters. Moving the action bar to the right: (Reducing treble noises) The further right the stronger the filter. Moving the action bar to the left: (Reducing bass noises) The further left the stronger the filter. In the middle gives you a more equal natural experience. Off turns all filters off and you hear the world as it is.
Focus FOCUS Feature Card What Is Focus? How Can Focus Help You? The microphones in IQbuds allow you to hear sound from all directions. In crowded or noisy environments you can focus on people in front of you while reducing the noise behind you. Focus directs the microphones in front of you, which emphasizes the noises in front of you and reduces the sounds behind you. NUHEARA Giving them more of your attention with less surrounding distractions. Pg.
How To Use Focus? Focus only has an on and off function. There are two ways to turn it on and off. You can Turn focus on and off by using this switch here You can also turn Focus on and off by using this button in the middle here. Example Scenario: You are at a restaurant with a loved one. You are trying to focus on them speaking but there is a table behind you being a little loud. To assist you in removing that sound behind you, turn focus on.
TAP TOUCH Feature (In My Buds) What Is Tap Touch? The three functions are: Tap Double Tap Long Tap Using these tap gestures can be powerful and allow you to use the IQbuds without needing to touch your phone Your IQbuds have tap sensors that can control different functions based on tap gestures. Both left and right IQbuds have the same gestures.
How Do I Use Tap Touch? You can select which IQbud you would like to customise by tapping on the left or right bud image. Select the function you would like to assign to the gesture, it will highlight dark blue and add a tick. You can also swipe left or right to change sides. Tap the white bar to close the function list and confirm your choice. Open the function choices by tapping on the white bars with the blue arrow. You can select the side you want to customise by tapping either bud image.
Environmental Lessons We have created a few lessons to give you some guidance how to use each feature card in specific environments. These are just a guide, we encourage tweaking and refining of each feature to find the perfect balance for you. Restaurant Environment Lesson one You’re now in a noisy restaurant. What features can you use to get the best experience? Select Restaurant as your location, then try this out. 1 Increase the Volume to around 3/4 to all the way full. 2 Turn SINC up to 3/4 full.
Office Environment Lesson Two At the office for a meeting? Ever have trouble focusing on someone talking? Select Office as your location, then try this out. 1 Volume to comfortable level, around 3/4 full. 2 SINC at around 1/4 full. 3 EQ at Min Bass filter, this may assist in removing some of the air conditioning humms. 4 Focus OFF, assuming there are different people sitting in different directions at a table. Volume Office Volume at 3/4 NUHEARA SINC World EQ Office SINC to 1/4 Pg.
Street Environment Lesson Three If you enjoy listening to music when walking but feel cut off from the world, we have an interesting feature for you. Get the best of both worlds, listen to music and hear what is going on around you, let’s see how: Select Street as your location, then try this out. 1 Open your favourite music app and select a song. 2 Depending on how loud your music is, try Volume anywhere between half and full. 3 Turn SINC, EQ and Focus off to give you the most natural experience.
IQstream TV Accessory Hardware IQstream TV is an accessory that we sell separately, to allow you to stream high quality audio to your IQbuds from your TV. Connecting + Set Up Once your IQstream TV is connected to your TV with the relevant cables, the manual will direct you to the app. The process is very simple. You will be asked to tap your phone gently on the IQstream box. NUHEARA You will get a ‘connected’ notification You will be asked to give the IQstream a name. Pg.
How Do I Use IQstream TV? First you will be presented with a stream source list screen. Your IQbuds can only stream from one source at a time. They can either stream from your phone (music, videos, phone calls) or from your IQstream TV (TV audio.) This tells you where your IQbuds are currently streaming from. iPhone This allows you to search for new IQstream TVs. (If you only own one please disregard) This will list other sources you can stream from.
When you select your IQstream from the stream source list, it will take a few seconds to connect. You will then be presented with a dial screen seen below, similar to the previous screens you have experienced. Move the active dot left to decrease IQstream TV volume, and right to increase TV volume. It’s important to note that the dial will only control what you hear through the IQbuds. Use the switch in the middle to mute and unmute. It won’t control the volume if what is coming out of the TV speakers.
You can use Volume when watching TV with others, to hear them as well as the TV. World Volume ON IQstream Audio On Or you can immerse yourself in the experience and turn World Volume off and enjoy what you’re watching. Volume OFF or ANC ON IQstream Audio On PS. A common scenario to use your IQstream TV, is to mute the TV and enjoying your movie without disturbing others sleeping next to you! NUHEARA Pg.
We hope this guide has provided you with some valuable information about the product. We would like you to note that all the places you may use IQbuds will be different, and we highly encourage you to tweak your settings and play around in all environments to get the best out of your product. Anything missing from this guide? Let us know by contacting support. NUHEARA Pg.
1Qbuds2 Max: SKU Model: NU318 True wireless active noise cancelllng earphones Safety and Handling Information Important Safety Instructions ► ► 04AIIGE CAILE CHAJICiECASE iaetJOS Read this instruction manual before using your IQbuds2 Max wireless earbuds (the product). Only use the earbuds in environments where Bluetooth wireless transmission Is permitted.
► This product generates magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators {ICD's) and other implants. Always maintain at least 10- cm {3.94") between the earbuds and/ or charge case and the implanted device. ► Earphones can lead to ear infections is not properly cleaned. Clean Nuheara IQbuds2 Max buds and silicone ear tips regularly. If skin problems develop, discontinue use and consult with a doctor.
Some states and countries do not allow limitations on how long such warranties, conditions and/or implied terms may last, so the limitations described above may not apply to you. This warranty is offered in addition to rights and remedies conveyed by consumer protection laws and regulations that cannot be statutorily waived and does not affect your applicable statutory rights. To the extent permitted under applicable law, the duration of any implied warranty shall be one year.
Country Twe Approval Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Rea:ulatorv Mark / i..o.o FCC Radio Exposure Information. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
