VX100 All-in-one Conference Microphone User's manual www.Nugenstech.
⑧ ①② ③ ④ ⑤ ⑥ ⑦ 1. Bluetooth 2. Volume Mute 3. Volume Down 4. Volume Up 5. Microphone Mute 6. Microphone Switch 7. Speaker 8. Microphone Connect to PCs: Nugens VX-100 is a plug-n-play device. Take out the USB cable and directly connect to Windows XP 7/8/10 and Mac OS X10.5 (Intel processor is required) Find Nugens VX-100 in setting option or USB audio device option within Windows Device Manager or IM tool.
Function of Keys: Bluetooth Bottom Press and hold Bluetooth Connect to turn on and a blue indicator cues a open status to pair with your device, once connected, blue inidicator will keep turned on. Press and hold button again to turn off Bluetooth. Volume Down Volume Up Speaker volume down. Speaker volume up. Speaker Mute Microphone Mute mute off. An indicator will show mute is turned on, press again to unmute. Press to mute on the horn, orange led light is on.
USB Connecting to PCs Bluetooth Connecting to Device Connecting Diagram Spec: Interface USB2.0 Full speed interface Max. Power About 2.5W Power supply USB power supply(5V/500mA) Radio interference standard VCCI level B Operating environment Temperature: 0°c ~ 40°c working humidity: 20% ~ 85% (no frost) Size 140x32x140mm,243x45x170mm (before and after packaging) Weight 280g/500g (before and after packaging) Computer environment Windows XP/7/8/10, Mac OS X 10.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
