Contents WHAT’S IN THE BOX BE Free6 EARPHONES THE BASICS Charging your BE Free6 Battery Low Alarm and Battery Status Bluetooth pairing Using your BE Free6 earbuds to have stereo sound Using your BE Free6 right and left earbuds in mono mode Pairing additional devices with your BE Free6 Switching between Stereo mode and Mono mode Reset BE Free6 Right earpiece with Left earpiece Restoring Pairing information Power On/ Power Off Handling phone calls and Siri/Google Assistant Listening to music MISCELLAN
WHAT’S IN THE BOX Item BE Free6 earphones Silicon tips (in L/M/S), CP350 (in S), Total of 4 pairs ear tips (CP350 tips already on the earbuds) Charging case USB-C Charging cable Basic user’s manual Safety Instruction 3
BE Free6 EARPHONES 1 2 4 3 1. Charging pins 2. Multifunction button (MFB) 3. Microphone 4.
The BASICS Charging Your BE Free6 Although your BE Free6 come with a partially charged battery, it is recommended that you fully charge your BE Free6 and the charging case before first use. Note: Please remove the film between charging pins and the earbuds in the case before you charge. 1. Place the BE Free6 earbuds into the charging case (1). The USB-C charging cable should be connected to the USB-C port on the charging case and to either a PC or a dedicated USB charger.
NOTE: A. It takes up to one and a half hours to fully charge the left/right earbuds and charging case. B. To maintain the best performance of the battery, we recommend that the battery in both the earbuds and charging case are charged regularly. Do not deplete the battery of the earbuds and charging case before charging. C. To check the battery level of the charging case: Open the top cover and check the number of LEDs that are solid white.
Bluetooth Pairing Your BE Free6 can perform in stereo mode (both earbuds connect to each other), or in mono mode (Right and left earbuds in individual uses).
Remove both earbuds from the charging case and insert them in your ear, both earbuds will turn on automatically and connect to each other. You will hear voice prompt “Paired”. Pairing BE Free6 earbuds with source device 1. When removing the Right earbud from the charging case, press and hold the BE Free6’s Power/Function button for 4 seconds until the LED indicator light flashes orange and white or you hear voice prompt “Pairing mode activated”. Your BE Free6 is now in pairing mode. 2.
NOTE: Consult your source device’s user manual for instructions on activating Bluetooth. Pairing additional devices with your BE Free6 To pair additional devices to your BE Free6 ensure that your BE Free6 is not connected to any device then repeat the steps 1,2,3 outlined above. Note: A. Your BE Free6 can store pairing information for up to eight devices.
Reset BE Free6 Right earpiece with Left earpiece Each unit of BE Free6 are paired in the factory. While stereo mode is active, you will hear “Paired” (right and left earbuds paired to each other) once both earbuds are removed from the charging case. If not, please place both earbuds back into the case. Upon seeing orange LED lights, please remove both earbuds again to check if both earbuds are paired to each other.
Power On/Power Off There are two ways to turn on your BE Free6 1) Pick up the earbuds from the charging case (case with sufficient power capacity), they will automatically power on. 2) When your BE Free6 are not in the charging case and are Off, press Power/Function button for 5 seconds until the LED indicator flashes white and you hear the voice prompt “Power on” on both earbuds.
Handling Phone Calls and Siri/Google Voice When your BE Free6 are connected to a Bluetooth-enabled smartphone, you can handle your phone calls directly using power/function button on both earbuds. NOTE: When on a call both earbuds handle audio. In a noise background, you can pick right earbud and place its microphone close to your mouth to enhance your voice (to the other side of the call).
Listening to Music You can enjoy and control audio through Power/Function button on your BE Free6. Audio option Action Play or pause audio Tap the Power/Function button on either right or left earpiece Skip to next track Double click the Power/Function button on right or left earpiece Back to previous track* Triple click the Power/Function button on right or left earpiece NOTE:* To operate function of “back to previous track”, you can only back to start of the sound on some Android smartphones.
MISCELLANEOUS Water Resistant NuForce headsets with the IPX5 water ingress rating are splash-resistant and water-resistant, preventing malfunctions due to moisture entering the body of the headset. However, the splash-resistant and water-resistant qualities are non-permanent and may degrade with wear and tear from daily use. Liquid damage is not covered by the warranty.
If the headset is not wiped after being worn during a workout, the salt from the sweat may negatively impact the lifespan of the headset. Therefore, we recommend that you use a clean cotton cloth to wipe the headset after your workout, in order to keep the headset clean. Bluetooth Connectivity Bluetooth is a short-range wireless technology. Its connection quality may be interfered with metals, walls, and devices including but not limited to microwave ovens. At the same time, Bluetooth’s 2.
Voice Prompts list The BE Free6 are pre-loaded with English voice prompts “Power On” “Power Off” “Battery Low” “Device connected” “Paired” “Pairing Mode Activated” Disclaimer The BE Free6 is equipped with the latest technology however functionality may vary by device. Federal Communication Commission Interference Statement FCC ID: 2ABRC-APBEFREEL, 2ABRC-APBEFREELL 1. This device complies with Part 15 of the FCC Rules.
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Regulatory Conformance Hereby, Optoma Corporation declares that the radio equipment type [Bluetooth earphones APBEFREEL] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.optoma.
Specification Connection type Bluetooth type Bluetooth profile Bluetooth 2.4Ghz V5.0 HSP v1.2, HFP v1.7, A2DP v1.3, AVRCP v1.6 , Codec SBC, AAC Driver Type Dynamic Driver size 5.6mm, Graphene diaphragm Impedance 16 Ohm Battery life (estimated) Battery type Microphone sensitivity Frequency response Sensitivity Range Weight Up to 6 hours (for the earbuds) Lithium-ion battery, Typical 3.
