Instruction Manual

2
FEATURES
- The Pleco Sensor mounts to an existing water meter and provides water consumption
information to the user through the Pleco Display and the Pleco smartphone app.
- Water consumption information is provided in near real-time.
- Detects different types of water usage: Faucet, flush, shower, irrigation, and other.
Usage identification is not 100% accurate due to variability in water supply installations.
- Easy setup, no tools required to install.
DESCRIPTION
SENSOR: The Pleco sensor attaches to a functioning water
meter and sends water usage information in near real time to
the Pleco display. No tools are required to attach the sensor
to the water meter. The sensor uses four (4) standard D-cell
batteries that on average are expected to last over four
months before being replaced.
DISPLAY: The Pleco 5-inch touch-screen display receives
sensor data and shows water usage in near real time. It
works as a hub connecting to the Internet and the
smartphone app. It can be wall mounted or placed on a
counter or desk. The display should be within 50 ft. distance
from the sensor for effective communication. It comes with a
rechargeable battery that lasts over 1-hour. It is recommend
to keep the display connected to the external power supply
for continuous use.
CONTAINER: The container used to ship Pleco is also used
to calibrate the system. During calibration you will fill the
container to the 1-Gallon water mark in order to start the
system. All foam packaging materials should be removed
from the container prior to calibration.
APP: The Pleco app will show water usage in near real-time
in your smartphone. It displays information similar to that on
the Pleco display and provides a convenient way to monitor
your water usage when you are away.