11.0
Table Of Contents
- Welcome
- 1 Installation and setup
- 2 Introduction
- 3 Tutorial: Processing documents
- Quick Start Guide
- Processing documents using the OCR Wizard
- Processing documents automatically
- Processing documents manually
- Processing a document automatically and finishing it manually
- Processing from other applications
- Processing documents with Schedule OCR
- Defining the source of page images
- Describing the layout of the document
- Manual zoning
- Table grids in the image
- Using zone templates
- 4 Proofing and editing
- 5 Saving and exporting
- 6 Technical information
SUPPORTED FILE TYPES 79
u Remove Windows applications that you do not use.
u Defragment your hard disk. See Windows online Help for
instructions.
u Clear the cache for your web browser and limit its size.
SUPPORTED FILE TYPES
The program supports a wide range of file types, as detailed below.
File types for opening and saving images
Input image files can have resolutions up to 600 dpi, but 300 dpi (both
horizontally and vertically) is recommended for optimum OCR accuracy.
The program stores black-and-white images at their original resolution,
but grayscale and color images are not usually saved above 150 dpi.
Hover the cursor over an image for a popup window showing the size and
resolution of the original image.
File type Extension
Multi-
page
Open / Save
B/W, Grayscale,
Color
BMP, Bitmap *.bmp No Open and Save All
DCX *.dcx Yes Open and Save All
JPEG *.jpg No Open and Save Grayscale, color
PCX *.pcx No Open and Save All
PNG *.png No Open and Save All
TIFF Compressed G3 *.tif Yes Open B/W
TIFF Compressed G4 *.tif Yes Open and Save B/W
TIFF PackBits *.tif Yes Open and Save All
TIFF Uncompressed *.tif Yes Open and Save All
Note If you try to save a black-and-white image to JPEG format, the
program will offer conversion to grayscale. With TIFF G3 and G4 it will
offer conversion to black-and-white.