11.0

SETTING UP YOUR SCANNER WITH TEXTBRIDGE PRO 15
u The page sizes that the Scanner Wizard believes that your
scanner supports are listed in the window. To make any changes
to the page sizes, click on Advanced, make the changes and then
click on Next.
u Insert a page with text but no pictures into your scanner. Click
on Next to begin a scan in black and white mode.
u If necessary, click on Inverse Image… or Missing Image… and
make the appropriate selections.
u Once the image appears correctly in the window, click on Next.
u If you have a color scanner, insert a color photograph or a page
with a color picture into your scanner. Click on Next to begin a
scan in color mode. If necessary, click on Inverse Image… or
Missing Image… and make the appropriate selections. Once the
image appears correctly in the window, click on Next. If your
scanner cannot scan in color, skip this step.
u Insert a photograph or a page containing a picture into your
scanner. Click on Next to begin a scan in grayscale mode. If
necessary, click on Inverse Image… or Missing Image… and
make the appropriate selections. Once the image appears
correctly in the window, click on Next.
u You have successfully configured your scanner to work with
TextBridge Pro 11! Click on Finish.
To change the scanner settings at a later time, or to set up a different
scanner, or to test and repair an installed scanner, please follow one of
these two methods to reopen the Scanner Wizard:
u StartÉProgramsÉScanSoft TextBridge Pro 11.0ÉScanner
Wizard or
u StartÉProgramsÉScanSoft TextBridge Pro 11.0ÉTex tBr id ge
Pro 11.0ÉTools menuÉOptionsÉScanner…ÉSetup button.
Note To test and repair an improperly functioning scanner, follow the
procedure above, selecting ‘Test and configure current scanning source’ at
the start of the process.