5.0

2: Scanning Items
28
Table
of Contents
To delete a created scan mode:
1. From the Visioneer menu, choose Scan Settings. The Scan Settings
dialog box appears.
2. From the Scan Mode pop-up menu, choose Delete. A dialog box
appears asking you to select the scan mode you want to delete.
You cannot delete predefined scan modes.
3. Select the scan mode you want to delete and click OK. The scan
mode is removed from the Scan Mode pop-up menu.
▼ NOTE: You cannot change the name of a created scan mode.
You must first delete the scan mode, and then create it again.
SCANNING COLOR AND GRAYSCALE ITEMS
By default, your scanner is set up to scan black-and-white items that you
typically want to fax, file, or copy. All of the scan modes, except for
Storing Photos, scan your items in black and white. If you want to scan
color or grayscale items, you should either choose the Storing Photos
mode for a target application, or change the scan mode Number of Colors
to Grayscale (8 bit) for grayscale items and Color (24 bit) for color items.
▼ NOTE: For some target applications, such as PhotoEnhancer, Storing
Photos is the default mode. Therefore, you do not need to complete
the following procedure to scan color items to this type of target
application.