14.0

PaperPort Getting Started Guide 26
When the scan is complete, you will see your item on the PaperPort
desktop.
If your scanner does not use a TWAIN or WIA device driver, use the program
that came with your scanner to scan items. Then, copy or move the scanned
items to PaperPort. Refer to the PaperPort Help for more information about
scanning.
PaperPort makes it easy to scan pages as separate items or as a multi-page
item. To scan and collate two-sided pages on your ADF scanner, flip the
pages when prompted, click
Scan Other Side , and PaperPort will
automatically scan and collate the pages in the correct order.
You can also use your scanner device buttons to scan directly into
P
aperPort. Open the Windows system Control Panel, choose Scanners and
Cameras, choose an event in the Events tab, and assign PaperPort to it.
You can also use a high-speed, networked scanner to scan items to a networked
folder and then add the folder to PaperPort. Use DesktopDelivery (available in
PaperPort Professional) to monitor folders for incoming scanned images.
Set up your scanner with PaperPort
Before using PaperPort for scanning, your scanner
should be installed with its own scanner driver software
an
d tested for correct functionality. Scanner driver
software is not included with PaperPort.
Properly installed and correctly functioning scanners are
im
mediately available in PaperPort by clicking the
Select button, and choosing one in the Available
Scanners
dialog.

If you are not satisfied for your scan results, you can run the PaperPort
Scanner Setup Wizard from the Start menu, under the program group
PaperPort 14.