User manual

Installation and Setup Setting up Your Scanner with OmniPage 8
exclude or add modules. To exclude a module, click its down arrow and select ‘This feature
will not be available’.
4. Follow the instructions on each screen to install the software. All files needed for scanning
are copied automatically during installation.
Unless deselected in the OmniPage Ultimate installation, Nuance PDF Create 8 installation
starts as soon the installation of OmniPage is completed. Document-to-document conversions
depend on PDF Create being present.
OmniPage Ultimate is supplied with a complimentary copy of the Nuance PaperPort
®
14
Professional document management product. This must be installed separately and has its own
system requirements.
Setting up Your Scanner with OmniPage
All files needed for scanner setup and support are copied automatically during the program’s
installation, but no scanner setup occurs at installation time. Before using OmniPage for
scanning, your scanner should be installed with its own scanner driver software and tested for
correct functionality. Scanner driver software is not included with OmniPage.
Scanner setup is done through the Scanner Setup Wizard. You can start this yourself, as
described below. Otherwise, it appears when you first attempt to perform scanning.
Proceed as follows:
• Choose Start > All Programs > Nuance OmniPage Ultimate> Scanner Setup Wizard
or click the Setup button in the Scanner panel of the Options dialog box.
or choose Scan in the Get Page drop-down list in the OmniPage Toolbox and click the
Get Page button.
• The Scanner Setup Wizard starts. If you have a web connection, the first panel invites
you to update the scanner database supplied with the wizard. Choose Yes or No and
click on Next.
• Choose ‘Select and test scanner or digital camera’, then click Next. If you have a single
installed scanner, it appears, along with any scanners previously set up with OmniPage.
If the required scanner is not listed, click Add Scanner... .
• You see a list of all detected scanner drivers in the selected categories. This can include
network devices. Select one and click OK. To install a second device, you must run the
Scanner Wizard again.