16.0

Setting up your scanner with OmniPage 13
• Click Next to start the tests. For the Basic scan test, insert
a test page into your scanner. The wizard will scan using
your scanner manufacturer’s software. Click on Next. Your
scanner’s native user-interface will appear.
• Click on Scan to begin the sample scan.
• If necessary, click on Missing Image… or Improper
Orientation... and make the appropriate selections.
• Once the image appears correctly in the window, click on
Next.
• Move through the remaining requested tests, following the
instructions on the screen.
• When all the requested tests have been completed
successfully, the Scanner Wizard reports and invites you
to click on Finish.
• You have successfully configured your scanner to work
with OmniPage 16!
To change the scanner settings at a later time, or to setup or remove
a scanner, reopen the Scanner Setup Wizard from the Windows
Start menu or from the Scanner panel of the Options dialog box.
To test and repair an improperly functioning scanner, open the
wizard and select ‘Test the current scanner or digital camera’ in the
second panel, then work through the procedure described above,
maybe using advice received from Technical Support.
To specify a different default scanner, open the wizard to reach the
list of setup scanners. Move the highlight to the desired scanner and
be sure to close the wizard with Finish.
To get updated settings for your current scanner, open the wizard,
request a fresh database download in the first screen, then choose
‘Use current settings with current device’, click Next and then
Finish.