16.0

Setting up your scanner with OmniPage 11

To install OmniPage:

1. Insert the OmniPage CD-ROM in the CD-ROM drive. The

installation program should start automatically. If it does not

start, locate your CD-ROM drive in Windows Explorer and

double-click the

Autorun.exe program at the top-level of the

CD-ROM.

2. Choose a language to use during installation. Accept the End-

User License Agreement and enter the serial number shown on

the CD envelope.

3. Choose a complete or a custom installation. A complete

installation installs all RealSpeak

Text-to-Speech language

modules (currently 9). Custom installation lets you exclude or

add modules. To exclude a module, click its down arrow and

select ‘This feature will not be available’.

4. Follow the instructions on each screen to install the software.

All files needed for scanning are copied automatically during

installation.

Setting up your scanner with OmniPage

All files needed for scanner setup and support are copied

automatically during the program’s installation, but no scanner

setup occurs at installation time. Before using OmniPage 16 for

scanning, your scanner should be installed with its own scanner

driver software and tested for correct functionality. Scanner driver

software is not included with OmniPage.

Scanner setup is done through the Scanner Setup Wizard.

You can start this yourself, as described below. Otherwise,

it appears when you first attempt to perform scanning.

Proceed as follows:

• Choose Start > All Programs > ScanSoft OmniPage 16 >

Scanner Setup Wizard