2.0

Filling Fields
Filling a Form 7-7
If you enter a size larger than the fill graphic field, only part of
the graphic will be visible.
5 Enter offset measurements under
Offset
if you want
.
This is useful if you want to position a graphic exactly in the
field, crop a large graphic, or move the graphic away from a
field border that would interfere with its design.
• Enter a number in
Left
to specify how far from the left side of
the field to place the graphic.
• Enter a number in
Top
to specify how far from the top of the
field to place the graphic.
6 Select or deselect
Transparent.
•Select
Transparent
if you want to be able to see information
behind the graphic.
Whether a graphic prints transparently depends on your
printer driver. See your printer documentation for
information.
• Deselect
Transparent
if you want the graphic to be opaque.
You will not be able to see information behind the graphic.
7 Click
OK.
OmniForm imports the graphic and displays it in the fill
graphic field.
To delete an existing graphic:
Select
None
in the
Source
pop-up menu and click
OK
to delete an existing
graphic from a fill graphic field.
List Fields
Fields can contain a list of selectable entries. A pop-up menu arrow
appears when the cursor is in the field.
Click the arrow to open the list
Select an entry. The entry appears in the field.