2.0

Filling Fields
Filling a Form - 185
text boxes under
Size.
The size of the fill graphic field is
displayed at the bottom of the Fill Graphic dialog box.
If you enter a size larger than the fill graphic field, only part of
the graphic will be visible.
5 Enter offset measurements under
Offset
if you want
.
This is useful if you want to position a graphic exactly in the
field, crop a large graphic, or move the graphic away from a
field border that would interfere with its design.
• Enter a number in
Left
to specify how far away from the left
side of the field to place the graphic.
• Enter a number in
To p
to specify how far away from the top of
the field to place the graphic.
6 Select or deselect
Transparent.
•Select
Transparent
if you want to be able to see information
behind the graphic.
Whether a graphic prints transparently depends on your
printer driver. See your printer documentation for
information.
• Deselect
Transparent
if you want the graphic to be opaque.
You will not be able to see information behind the graphic.
7 Click
OK.
OmniForm imports the graphic and displays it in the fill
graphic field.
To delete an existing graphic:
Select
None
to delete an existing graphic from the form and leave the fill
graphic field empty.
To import a graphic from a TWAIN source:
1 Click the fill graphic field or tab to the field and press the Space
bar.
The Fill Graphic dialog box appears.
2Select
TWAIN
in the
Source
drop-down list.
3 Click
Select Source
to open the Select Source dialog box.
4 Select your TWAIN source and click
OK
to return to the Fill
Graphic dialog box.