4.0

Filling Fields
22 Chapter 2
5 You can also enter offset measurements under
Offset.
This is useful if you want to position a graphic exactly in the
field, crop a large graphic, or move the graphic away from a
field border that would interfere with its design.
• Enter a number in
Left
to specify how far away from the left
side of the field to place the graphic.
• Enter a number in
To p
to specify how far away from the top of
the field to place the graphic.
6 Select or deselect
Transparent.
• Select
Tr a n s p a re n t
if you want to be able to see information
behind the graphic.
Whether a graphic prints transparently depends on your
printer driver. See your printer documentation for
information.
• Deselect
Tr an s p a re n t
if you want the graphic to be opaque.
You will not be able to see information behind the graphic.
7Click
OK.
OmniForm Filler imports the graphic and displays it in the fill
graphic field.
To scan in a graphic:
1 Click the fill graphic field or tab to the field and press the Space
bar.
The Fill Graphic dialog box appears.
2 Select
TWAIN
in the
Source
drop-down list.
3Click
Select Source
to open the Select Source dialog box.
4 Select your TWAIN source and click
OK
to return to the Fill
Graphic dialog box.