15.6

Appendix C: Using Dragon over a remote desktop connection
15. Confirm your selections, and then click Install.
16. If a dialog box appears asking you to allow automatic restarts, click Yes.
The Installation Progress screen displays the status of the installation.
17. When the installation is complete, verify that the installation was successful.
18. Click Close.
19. Restart the computer, even if the server was not restarted automatically.
Configure the local group policy on the server
1.
On the server, open a command prompt and run gpedit.msc.
2. Navigate to Computer Configuration>Administrative Templates>Windows
Components>Remote Desktop Services>Remote Desktop Session Host>Device and
resource redirection.
3. Enable the Allow audio and video playback redirection option:
1. Right-click the Allow audio and video playback redirection screen.
2. Select Edit.
4. Select Enabled, and then click OK.
5. On the client computer, launch the registry editor:
1. Go to Start > Run….
2. In the Run line, type regedit.
3. Click OK.
6.
Set the following registry setting to 0:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server-
\WinStations\RDP-Tcp\fDisableAudioCapture REG_DWORD0x00000000
Allow connections from client computers
1. On the server, open the Control Panel.
2. Navigate to System and Security>System.
3. Select the Remote settings>Remote tab.
4. Choose your preferred configuration to allow remote connections.
5. Click OK.
6. Proceed to “Configuring the Dragon clients” on page 89.
Configuring Windows Server 2008 R2
Install and configure the Remote Desktop Services role
1. Open Remote Desktop Connection to the server, or go directly to the server console.
2. Go to Start>Administrative Tools and open the Server Manager.
3. Right-click Roles, and then select Add Roles.
The Add Roles Wizard opens.
4. Click Next.
The Select Server Roles screen appears.
86