15.0
Table Of Contents
- Chapter 1: About this guide
- Chapter 2: Preparing to install Dragon
- Chapter 3: Initial Installation of Dragon
- Chapter 4: Installing the Dragon client with settings
- Chapter 5: Configure the Dragon Client for NMC
- Appendix A: Modifying nsdefaults.ini
- Appendix B: Options for MSI installations
- Appendix C: Using Dragon over a remote desktop connection
Dragon Client Installation Guide
Installing the same Dragon configuration on multiple
computers
Use the following procedure to install with setup.exe in the command line from a single client machine.
Note: When you are using the setup.exe method, you must ensure that all flags and properties
are within the same set of quotes, directly after /v, without a space.
1. Open a Command Prompt:
l Windows 7: Start > All Programs > Accessories > Command Prompt
l Windows 8.1: From the Start screen, click the down arrow to show all apps, and then
scroll to Windows System > Command Prompt
l Windows 10: Start > All apps > Windows System > Command Prompt
2.
Insert the installation DVD and search for the directory where setup.exe is located.
3.
In the Command Prompt window, switch to the setup.exe directory.
4. To install the configuration you created during the initial installation, enter the following,
substituting your information as needed:
setup.exe /s /v"SERIALNUMBER=<SerialNumber>
INSTALLDIR=\"C:\Program Files (x86)\Nuance\NaturallySpeaking15\"
DEFAULTSINI=\"C:\<full_path>\nsdefaults.ini\"
/L*v C:\Logs\logfile.log"
To include Roaming network settings, include the option:
ROAMINGUSERINI=\"C:\<full_path>\roamingdef.ini\"
If you do not pass the ROAMINGUSERINI option, Dragon uses default Roaming network settings.
32