15.0
Table Of Contents
- Dragon_NMCInstallGuideCover_20160929_v4
- About this guide
- Chapter 1: Introduction
- Chapter 2: Installation checklist
- Chapter 3: Preparing for your installation
- Chapter 4: Installing the servers
- Chapter 5: Post-installation tasks
- Chapter 6: Upgrading Nuance Management Center
- Chapter 7: Preparing for your Active Directory single sign-on configuration
- Chapter 8: Installing the Local Authenticator
- Appendix A: Database backups and data retention
Nuance Management Center Server Installation and Configuration Guide
3.
Copy the thumbprint of the certificate. You use the thumbprint to bind the certificate to the port used
by the primary NMS services in the next step.
For information on retrieving the thumbprint, see https://msdn.microsoft.com/en-us/lib-
rary/ms734695.aspx.
4.
Verify that the UseSSL setting is set to true (this should have been done by the installer):
a.
In Nuance.NMS.Server.exe.config, located in the NMS Platform installation folder, find
the line near the top that contains the key="UseSSL" tag.
b.
Change the value to true:
<add key="UseSSL" value="true"/>
5.
Bind the SSL certificate under IIS to port 443.
a.
In the IIS Manager, from the left panel, click Default Web Site.
b.
From the right panel, click Bindings....
The Site Bindings dialog box opens.
c.
Click Add.
The Add Site Binding dialog box opens.
d. From the Type drop-down list, select https.
e. From the SSL certificate drop-down list, select the certificate that you installed.
26