11.5

Dragon Administrator Guide version 11.5
Enabling the Roaming feature on each
computer where a user will dictate
After you have set up the network location for the Master Roaming User Profiles and installed or
upgrading Dragon on the computers in your network, you must enable the Roaming feature on
each computer where the user will dictate using a Roaming User Profile.
Step 1: Start Dragon
You must start Dragon to enable the Roaming feature.
Step 2: If already Dragon is running, select
Administrative Settings
If Dragon is already running, on the DragonBar, select Tools > Administrative Settings and
click Proceed. This action closes all open User Profiles and displays the Administrative Settings
dialog box.
n If the Open User Profile or Profile Creation wizard dialog box appears when you start
Dragon, click Cancel .
n If a User Profile opens automatically (Dragon does this if there is only one User Profile
available), select Profile > Close User Profile on the DragonBar .
Step 3: Turn on the Roaming feature
After closing any open User Profiles:
1. If Dragon is running, from the DragonBar menu, select Tools > Administrative Settings .
This action displays the Administrative Settings dialog box.
Note: You do not have to be running Dragon to act as an administrator of the product.
Instead of opening the Administrative Settings dialog box from the DragonBar
menus, you can open the dialog box from the command line by selecting Start > Run ,
then entering the following command in the Open text box (include a space between
natspeak.exe and the /SetAdministrativeOptions option that follows it):
“C:\Program
218