User's Manual

2 SafeCom Go Sharp - Device server

D60709-22

2.3 Configure SafeCom Device Server

The SafeCom Device Server must be configured manually to reference the right

SafeCom Server. This is done by adding the SafeCom Server in the SafeCom

Device Server. Furthermore a list of failover SafeCom Servers can be set up.

2.3.1 Login to SafeCom Device Server

1. Open a web browser and enter the server address (IP address or

hostname) for the device server followed by :8080/safecom in the

address field.

Example: http://localhost:8080/safecom

Note: Use of JavaScript (Active Scripting) must be enabled.

2. Enter Username (default is admin) and Password (default is nimda).

3. Click OK.

4. If a Limited access dialog appears, click OK.

2.3.2 Add SafeCom Server

1. Login to SafeCom Device Server (2.3.1).

2. Click Device Server in the left pane.