Instructions / Assembly

635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax [phone]
http://shop.bluworldusa.com · www.nu-flame.com
SETUP INSTRUCTIONS FOR TORCIA
Read and Understand the entire Nu-Flame Manual prior to use.
Make certain to inspect the package thoroughly. Carefully remove and unwrap your Nu-Flame
fireplace.
Your fireplace will have the following components:
1. Black Fireplace
2. Stainless Steel Burner
3. Safety Mounting Bracket (3 pieces)
4. Glass Wind Screen
5. Stainless Steel Glass Holder Stand-off Tubes with Thumb Screws (4 each)
6. Hardware Bag
7. Dampener tool
You may wish to purchase a funnel for pouring fuel into the burner
Place the burner into the burner base, the
opening of the burner will face away from the
wall. Make certain the burner is well seated and
sitting level.
Mark on your wall exactly where you wish to
hang the fireplace using the overall height and
width. Once you are satisfied with the
placement make a mark on the wall 7 3/4”
down from the very top of where you want the
fireplace to be mounted. This is where the
bottom of the horizontal mounting bracket will
sit.
Using a level draw a line horizontally on the
mark you just made.