Product Overview

iWave
®
-V
Vortex Air Cleaner
Description
With the technology installed in over 100,000 applications
worldwide, iWave-V is a low-maintenance, bi-polar, high-
output ion generator designed specifically for treating air in
residential duct A/C systems (but could be used in other air
conditioning applications). As the air flows past the iWave-V,
positive and negative ions actively purify the supply air, killing
mold, bacteria and viruses in the coil and living space. The
ionization process also reduces allergens, smoke and static
electricity, as well as controlling odors (cooking, pet, VOCs) and
other particles (no more sunbeams) in the air without creating
ozone or any harmful byproducts.
Application
iWave-V treats the air in residential duct air conditioning
systems up to 6 tons (2400 CFM) in size (or other appropriate
A/C applications). Designed for universal mounting, the iWave-V
typically requires only 15 minutes to install inside or outside
of duct, or to attach magnetically near the indoor fan. Install
between air filter and cooling coil to treat the indoor coil; as an
alternative, the iWave-V can be installed in supply air.
Specifications
LOW MAINTENANCE AIR PURIFIER FOR
RESIDENTIAL AIR CONDITIONING SYSTEMS
• Needle point ionization actively treats air in the
living space
• For systems up to 6 tons (2400 CFM)
• Installs in minutes with universal mounting options
and integrated magnets
• Small compact design with no replacement parts
• Kills mold, bacteria and viruses
• Reduces allergens, odors, smoke, static electricity
and other airborne particles
• Reduces ventilation requirements
• Keeps coil cleaner by thoroughly killing biological
activity
• UL and cUL approved
• Three-year warranty
Input Voltage: 24 VAC
Power (VA): 10 VA
Frequency: 50/60 HZ
System Size: 6 tons (2400 CFM)
Ion Output: 160 million ions/cc
Dimensions: 4" Dia. X 2.5" H
Weight: 0.6 lb.
Electrical Approvals: UL and cUL approved
Service Temp. Range: -40ºF to 160ºF
Packaging
1 each 4900-40
iWave-V Installation Instructions
1. Disconnect air handler power before installing.
2. Mount unit to fan inlet, internal wall duct or external
duct.
3. Connect only 24 VAC nominal power. A dedicated
power supply may be necessary.
4. Unit may be powered 24/7 or may be interlocked with
fan – unit only purifies when air is flowing.
5. Red wire goes to 24 VAC; black wire goes to neutral or
ground.
6. Green LED will illuminate when powered and there are
no faults.
7. Do not touch carbon fiber brushes while powered!
8. NOTE: Make sure air flows across both brushes at the
same time, like a football through a field goal post.
9. CRITICAL: Ensure all 24 VAC wiring stays away from
carbon fiber brushes and is per NEC/local codes.
Secure wires if necessary with wire/tape so they never
move and touch brushes.
10. CRITICAL: Make sure the carbon fiber brushes are
at least 2 inches away from anything metal and other
wiring!
11. The best location to mount the device is after the
particle filter and before the cooling coil. This ensures
pathogens, mold and odors are controlled throughout
the entire depth of the coil.
12. Leaving the fan in the “on” position will provide the best
air purification results.
13. Unit has a 250 VAC/1A in-line fuse. If 24 VAC is
confirmed and LED is off, then check the fuse.
Indoor Air Quality
Nu-Calgon Product Bulletin 4-5
2008 Altom Ct. • St. Louis, MO 63146 • 800-554-5499 • www.nucalgon.com
Calgon is a licensed trade name • (617) 4-5