General Info

No. 50P Poly Sprayer
The No. 50P Poly Sprayer is constructed
of high density translucent polyethylene.
The nozzle is adjustable and the flow rate
is controlled by a thumb lever. It comes
with a 7˝ polyethylene pump and has a
half-gallon (3 pint) working capacity.
Part Number: 4770-0
No. 200P Water Pressurizing
Sprayer
It is constructed of a high density
translucent polyethylene. It has a funnel
top for easy addition of chemical as well
as emptying. It has a 2 gallon working
capacity, and it comes equipped with
a 14˝ brass wand, brass shut-off,
adjustable brass nozzle and a “quick-
connect” fitting for attaching water hose.
Part Number: 4771-2
No. 300P Poly Sprayer
The No. 300P is constructed of high
density translucent polyethylene. It has a
funnel-top for easy addition of chemical
as well as emptying, and it has a 3.5 gallon
capacity (3 gallon working capacity). It
comes with a 10˝ polypropylene pump,
extension tube with adjustable nozzle
and five feet of vinyl hose.
Part Number: 4772-0
Multi-Purpose Hand Sprayer
Twenty-four fluid ounce, transparent
bottle with positive action spray head.
Ideal for small jobs, such as window units,
water coolers, etc. Bottle is calibrated in
ounces and milliliters. Also, calibrated for
various use dilutions.
Part Number: 4768-W3
Select the Right Sprayer for the Cleaning Job
Cal-Shield
®
Poly Sprayer
The Cal-Shield Poly Sprayer is
constructed of high-density translucent
polyethylene. It has a funnel top for easy
addition of chemical as well as emptying
and has a one gallon working capacity.
It comes with a 10˝ polypropylene pump,
brass handle and extension tube with
adjustable nozzle, a wear-resistant hose
and a pressure relief valve. It is highly
recommended that this sprayer be
dedicated to Cal-Shield applications.
Part Number: 4770-2
Coil Gun
®
A different approach to coil cleaning
- a “hose-end” sprayer that features 5
different mix ratio settings designed for
coil cleaners. Also incorporates a quick
disconnect capability. Utilizes a 2 quart
capacity bottle and includes a foam
wand.
Part Number: 4774 -0
No. 220CP Poly Sprayer
This sprayer is constructed of high density
translucent polyethylene, incorporating
a molded funnel top, a 2 gallon working
capacity, reinforced 3 foot hose, Buna
seals, and chemical-resistant wand.
Utilizes a 10˝ polypropylene pump and
an adjustable nozzle.
Part Number: 4771-3
2008 Altom Ct. • St. Louis, MO 63146 • 800-554-5499 • www.nucalgon.com
Calgon is a licensed trade name • (1012) 3-125