Brochure

ManualsBrandsNu-Calgon ManualsCommercial Food Service Water Filtration SystemsMicro-Plus 4 Water Filter

How to Select The Correct Micro-Plus Device:

Whether you are going to treat an ice maker or a humidifier, the key to selecting the proper Micro-Plus is the amount of

water to be treated per day. In the case of ice makers and coffee urns, this can also be addressed in terms of pounds of

ice made per day or pounds of coffee per week. Simply consult the chart below:

APPLICATIONS

Operating Operating

Temperature Pressure Gallons

Number Systems Min./Max Min./Max per Day Ice Makers Coffee Makers

4615-W3 MICRO-PLUS 2 40°-80°F 20-125 psi 12.5 Up to 125 lbs. of ice/day 25 lbs. of coffee (1,250 cup)/wk.

4612-W3 MICRO-PLUS 4 40°-80°F 20-125 psi 25 Up to 250 lbs. of ice/day 50 lbs. of coffee (2,500 cups)/wk.

4613-Y8 MICRO-PLUS 8 40°-80°F 20-125 psi 50 Up to 500 lbs. of ice/day 100 lbs. of coffee (5,000 cups)/wk.

4614-Y8 MICRO-PLUS 16 40°-80°F 20-125 psi 100 Up to 1000 lbs. of ice/day 200 lbs. of coffee (10,000) cups)/wk.

TREATMENT CAPACITIES

All are equipped with 1/4” FPT connections, and this allows for the selection and use of compression or flare fittings, or “quick-disconnect” plug fittings.

HOW DOES MICRO-PLUS

WORK?

CUSTOM MOLDED

HOUSING

The housing is constructed of a

P.V.C. material which meets FDA

and NSF standards for use in

drinking water systems.

DEFLECTOR

This device has been designed to

direct the water flow evenly across

the filter bed, thereby eliminating

the potential for “channeling.”

FOURTH STAGE

A high density polyethylene

filter disc that traps

suspended particles as

small as 20 microns.

THIRD STAGE

Special blend of a highly absorbent activated

carbon. This carbon has the ability to absorb

larger amounts of chemicals such as chlorine

and ammonia so that there is no unpleasant

taste or odor in the water used to make your

beverages or ice.

SECOND STAGE

The second stage is a lime scale inhibitor. These crystals

are FDA and NSF approved food grade hexametaphosphate

crystals which slowly dissolve into the water and inhibit the

formation of lime scale or calcium deposits. This is done by

keeping the hardness particulates separated so they do not

precipitate and form deposits in the equipment.

FIRST STAGE

Inlet is a 100 mesh polypropylene screen that traps large

particles above 100 microns. This unique feature allows

smaller particles to be trapped within the filter itself so

that the inlet will not become prematurely clogged.