Product Overview

Insulation Products
Cork Insulation Tape
Nu-Calgon Product Bulletin 3-48
2008 Altom Ct. • St. Louis, MO 63146 • 800-554-5499 • www.nucalgon.com
Calgon is a licensed trade name • (512) 3-48
Read and understand the product’s label and Material
Safety Data Sheet (“MSDS”) for precautionary and first aid
information.
The MSDS is available on the Nu-Calgon website at
www.nucalgon.com.
• Forhotorcoldapplications
• Selfadhesiveandeasytoapply
• Stopssweatingandcondensationonlines
• Insulatesagainstheatloss
• Temperaturerangeof-30ºFto200ºF,and
won’tsagupto350ºF
• Useonironpipeandcoppertubingas
wellastees,valvesandfittings
Description
Cork Insulation Tape was developed specifically for the
air conditioning and refrigeration industry. Formulated
and manufactured, to meet specific specifications
as an insulating material for preventing sweating and
condensation on refrigerant lines, cold pipes and other
commercial refrigeration and air conditioning systems.
It also can serve as an excellent insulator on hot pipes,
wrapping valves, tees, fittings, gasketing material. Also
used for sound-deadening material, it can be applied at
temperatures as low as -30ºF, as high as 200ºF, and
won’t sag up to 350ºF.
Application
Developed to provide insulation on lines to meet the
rigorous demands of today’s HVACR service engineers.
Cork Tape remains flexible, and has excellent paper
release, and adhesion strength to all surfaces.
DirectionsforUse
1. Cut end at an angle.
2. Start end and coil loosely around the pipe.
3. Tighten coil.
4. Cut patches for valves, joints, etc.
5. Press tightly and cover exposed pipe
One layer of tape will protect under most conditions. If
pipe or outside temperatures are very low, or if humidities
are very high, additional layers may be required. Contact
manufacturer for additional engineering data.
Packaging
2˝ x 1/8˝ x 30´ Roll 4217-W3