Tus neeg siv phau ntawv

6 7
BUTTON AND DISPLAY INSTRUCTIONS
The diagram below highlights all of the important features of the control panel.
BEFORE USING
Check for leaks
- Damage to the product during shipping may cause leaks.
1. Place humidier on a water-resistant surface.
2. Lift and remove the top housing by holding the sides of the housing. Do
not lift from the control panel.
3. Remove the lter and oat from the tank.
4. Fill the tank with water to the ll line and inspect for leaks.
• No leak found: Empty water from the tank and continue setting
up your humidier.
• If a leak is found: Please contact Customer Service and we will
immediately replace the damaged parts.
5. Select a rm, level, and at location to position the humidier.
6. Place the oat into the tank.
7. Remove the lter from the plastic packaging and place the lter back
inside the tank. Make sure the plastic portion of the lter is installed
upwards and the open end is facing the bottom of the tank and is ush
with the base.
8. Add water to the MAX ll line of the tank.
9. Reattach the top housing of the unit and securely latch into place.
6
HOW TO USE THE HUMIDIFIER
POWER
1. Press the On/Off button to turn the unit on.
a. 1st Press: ON, speed I (Low), 7-color changing night light, timer off.
b. 2nd Press: OFF.
NOTE:
The “FILTER RESET” light will turn on when it’s time to replace the
lter. Please see the instructions on Installing and Removing the Filter.
TIMER CONTROL
2. Press the Timer button to select your preferred operating time of 2-, 4-,
or 8-hours. The timer indicator light will show the selected operating time
and the unit will stop automatically when the selected operating time
has elapsed.
a. To select the continuous operating mode, press the Timer button
repeatedly until there are no timer indicator lights on.
NIGHT LIGHT AND SLEEP CONTROL
3. Press the Night Light/Sleep button to turn on/off the night light and turn on
sleep mode.
NOTE:
The night light will automatically rotate through 7 colors when the unit
is turned on.
• 1st Press: Fixed on one color after the indicator light ashes for 3
seconds.
• 2nd Press: Sleep Mode. The sleep indicator light will turn on and
ash for 5 seconds. All lights (except the sleep indicator light) will
turn off and the fan speed and timer will stay on the settings already
chosen.
• 3rd Press: Both Night Light and Sleep Mode will be turned off.
NOTE:
• Press the Night Light/Sleep button before the 5-second ashing time
ends to exit sleep mode.
• You can press other buttons before the 5-second ashing time ends and
change the other settings before the humidier goes into sleep mode.
• Under sleep mode, press any button to exit sleep mode and resume
previous settings.
• If the timer period ends under sleep mode, the unit will be turned off.
Press the power button to restart the unit.
1. Timer Indicator Lights
2. Timer Button
3. Night Light Indicator Light
4. Sleep Mode Indicator Light
5. Night Light and Sleep Button
6. Fan Speed Indicator Lights
7. Fan Speed Button
8. On/Off Indicator Light
9. Filter Reset Indicator Light
10. On/Off Button
7