User Manual

or (iii) the mode number may not be ideal for avoiding interference

(see Section 1.5.)

1.4.4 Upon successful registration, you should see the NTN Buzztime logo

or our game menu.

1.4.5 Repeat from Section 1.4.2 one Playmaker at a time. The

registration process should only take a couple of seconds for each

unit.

1.5 Mode Selection and Restrictions

There are currently 14 modes, and the idea is to have different modes for

locations in close proximity where it could interfere with each other.

Mode is also used for improving RF communications at the location if

there are inference sources lingering around. Technically speaking, Mode

number corresponds to a frequency hopping scheme that the Playmakers

and base use to communicate with one another.

Before the system gets shipped to a location for installation, the base

station should be pre-configured with a mode number. Under normal

circumstances, the default mode number should work fine for the location.

However when the need arises, the mode number can be changed from

the Control File Editor.

Figure 1 Changing Mode in Control File Editor

Before switching modes, the following points must be considered: