Tus neeg siv phau ntawv

20
Display: you can select the corresponding channel after triggering, only applicable to the yellow
trigger line
 Trigger function takes precedence over automatic scan function
 When the trigger signal is detected, the signal source will automatically switch to the
corresponding view and returns to the previous view when the delay time runs out; support
standby trigger
8.3.7 Auto Scan
 A window will pop up by touching the number box. Press On/Off to turn on/off the automatic
scanning function. Each view can be set whether to be automatically scanned. The duration of
automatic scanning ranges from 5s to 60s, 10s by default