Manual

179
Data Management
Store Measurement Results
 The pop-up window Append Data shows up.
Select the location ID and measurement ID, thus each mea-•
surement result is stored with an individual description for
later documentation.
Select • Append with the rotary wheel
and confirm with
enter
.
 The measurement data is stored on the SD Card.
Append Further Measurement Results
Move to the next location in the room, carry out the mea-•
surement and follow the described append data procedure.
Exit Append Mode
Open the memory menu •
.
Select • Exit Append after adding the last measurement.
Auto Append
Alternatively the XL2 can append measurement
data to the same report file automatically.
Start the Append mode and set • Auto Append
is ON in the memory menu or in the pop-up
window Start Append Mode.
Skip Append Data
If you select SKIP in the Append Data window,
then no measurement data is appended to the
report file.